From the archive · Full text
Reader shop tip
Dale Witham, Rainier, Ore.
“After drum lines break on my logging Cats and skidder, I replace the line with a new or good, used 5/8-in. line. Usually, the lines are dry and in good shape, with a lot of life left in…
Read the complete tip →From the archive · Full text
Reader shop tip
Dan Bjorkman, Bronson, Mich.
“I did a simple table saw upgrade that has made woodworking much easier. I bolted two table saws together. It gives me a larger work surface. It also simplifies my woodworking.
Read the complete tip →From the archive · Full text
Reader shop tip
David J. Byler, Brockway, Penn.
“For most lawn tractors with a 2-cyl. engine, the engine needs to be completely removed from the tractor to replace a faulty ignition coil. To save the customer labor costs, after consultation and permission, I cut out a…
Read the complete tip →From the archive · Full text
Reader shop tip 1 of 2
Individual tip 1 of 2 from this reader’s published contribution.
Dr. Karl Spees, Port Angeles, Wash.
“Three decades after taking a welding course, my stick welding machine and I periodically have issues. I had no idea what amperage I needed for a 3/32-in. 6013 rod. Also, my ground lead has spring weakness, dulled contacts…
Read the complete tip →From the archive · Full text
Reader shop tip 2 of 2
Individual tip 2 of 2 from this reader’s published contribution.
Dr. Karl Spees, Port Angeles, Wash.
“I found a set of new jumper cables at a garage sale at a price too good to pass up. I connected both cables to my work and the other ends to my ground lead clamp. I had…
Read the complete tip →From the archive · Full text
Reader shop tip 1 of 4
Individual tip 1 of 4 from this reader’s published contribution.
Steven Janis, Howell, Mich.
“When pulling an engine in the gravel driveway, casters don’t roll, and it’ll sink. Get a couple of 1/2-in. sheets of OSB and lay them end to end under the vehicle. Put the picker on them when you…
Read the complete tip →From the archive · Full text
Reader shop tip 2 of 4
Individual tip 2 of 4 from this reader’s published contribution.
Steven Janis, Howell, Mich.
“If you don’t have the skills to rebuild an engine, seek a local builder for classes to help you (for a fee). Learned skills, problems solved, and pride in yourself. I trained my son for backup skills. It…
Read the complete tip →From the archive · Full text
Reader shop tip 3 of 4
Individual tip 3 of 4 from this reader’s published contribution.
Steven Janis, Howell, Mich.
“I bought a gantry crane from Harbor Freight to help with body/chassis swaps. You just can’t use farm jacks and cement blocks all your life.
Read the complete tip →From the archive · Full text
Reader shop tip 4 of 4
Individual tip 4 of 4 from this reader’s published contribution.
Steven Janis, Howell, Mich.
“If you have an old AMC/Jeep with low engine pressure, do a copper tube oil bypass under the intake manifold from the front oil passage to a drilled and tapped hole between the number six and eight cylinders…
Read the complete tip →From the archive · Full text
Reader shop tip
Travis Weber, Ontario
“It seems the plastic tube on the metal wire handles on pails disintegrates quickly with daily use. After dealing with sore finger joints, I discovered a 3 1/2-in. piece of 3/8 or 1/2-in. braided water hose makes a…
Read the complete tip →
Photo: FARM SHOWFrom the archive · Full text
Reader shop tip
William Ridgway, Salem, Ind.
“My wife had trouble removing the battery from our Ryobi string trimmer. So, I glued some rubber feet onto the pads of an inexpensive squeeze clamp. Although it won’t win any beauty contests, it sure does work.”
Read the complete tip →From the archive · Full text
Reader shop tip 1 of 3
Individual tip 1 of 3 from this reader’s published contribution.
Allen Pederson, Nashua, Iowa
“I found a single field cultivator tooth with a spring on the highway. I bolted it to a tractor bucket to dig electric cable in.
Read the complete tip →