Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Issues / Vol. 31, No. 6 (2007)

Vol. 31, No. 6 (2007)

Money-Saving Repairs & Maintenance Shortcuts · Printed section pp. 36–39

44 selected entries · Complete text of selected entries

This issue’s section includes reader tips and feature-length shop stories. Held items and editorial notices are not reproduced.

Archive text: prices, coupons, availability and contact details reflect the original publication, not current offers. Reader methods are not universal instructions; follow manufacturer guidance and proper safety practices.

Reader shop tips

From the archive · Full text
Reader shop tip

Ralph Rumbley

Ralph Rumbley, Monroeville, Ala.

“I bought an old Deere planter and discovered that a gear on one of the planter units was missing. It was no longer available from the dealer. I had taken a course in aluminum casting many years ago so I got out my books and refreshed my memory. Then, using a gear from one of the other planter units, I was able to cast a perfect replacement. Anyone interested in making their own castings can find good books on the subject from Lindsay Publications (www.lindsaybks.com). I recommend the casting books by Dave Gingery.”

From the archive · Full text
Reader shop tip

Shad Fincher

Shad Fincher, Bloomburg, Texas

“I got a metal shaving in my eye while using a drill press. Using a tiny magnet that I found on a keychain, I was able to pull the shaving from my eye without doing any damage.”

From the archive · Full text
Reader shop tip

Dan Bodas

Dan Bodas, Pittsburg, Mo.

“I use my 2000 Kubota loader tractor every day. It’s a great tractor but the filters are very expensive. Instead, I use Wix oil and hydraulic filters. So far, I haven’t been able to find an aftermarket filter for the cab heating and AC unit.”

From the archive · Full text
Reader shop tip

Alan Altenbach

Alan Altenbach, Reedsburg, Wis.

“My 3-pt. mounted log splitter is so heavy that I had to come up with an easier way to move it around. I made a dolly with 3 caster wheels so when I’m finished with it, I just lower it onto the dolly and disconnect the 3-pt. Now I can roll it anywhere around the shop. Prior to that, I just dreaded using it because it was quite a chore to hook it up.”

From the archive · Full text
Reader shop tip

Terri Crown

Terri Crown, Ramah, N.M.

When snow slides off my steel barn and shop roof, it creates a large snow bank along the side of the barn that gets in the way. To solve the problem, I bolted a piece of 2-in. angle iron along the roof about 1 ft. in from the edge and ran an electric heater cord through it to melt the snow. It now melts into the rain gutter, rather than sliding off the roof.”

From the archive · Full text
Reader shop tip

Rolland T. Rutter

Rolland T. Rutter, Flippin, Ark.

“We applied Dura-Coat floor coating on our garage and shop floors as well as truck beds. It’s advertised widely to farmers as an indoor and outdoor coating for any surface – concrete, wood or metal. We figured it must be a good product. After 2 months it started chipping off. Now, when we sweep the floor, it comes right up. Before application, the floor was professionally cleaned as the instructions stated. When the problems started, we contacted the company numerous times and they would not return our calls or contact us at all.”

From the archive · Full text
Reader shop tip

Benton Cochran

Benton Cochran, Atoka, Okla.

“Here’s a simple way to make a saddle cut on a piece of pipe using an ordinary chop saw. Place the pipe on a table against a backstop, angled out at a 33 degree angle, and cut off the corner with the chop saw. Then turn the pipe 180 degrees and cut the other side the same way. You have to make the cut slowly because you’re cutting on the end, but it works great. You get a clean saddle cut that fits nicely against another piece of pipe. It helps to practice a bit on some scrap pipe.”

From the archive · Full text
Reader shop tip

Richard Duren

Richard Duren, Riverdale, Ga.

“My thanks to James McGowan for the idea in a recent issue of drilling holes in his shop’s concrete floor to drop bolts into to keep his ramps from sliding. I had braced my ramps with boards many times, which sometimes worked and sometimes didn’t. After drilling holes in the floor, I cut some round-headed bolts to drop into the holes when not needed so they don’t fill up with dirt and stuff.”

From the archive · Full text
Reader shop tip

Roy Stillman

Roy Stillman, Kane, Penn.

“We use snowmobile dollies under equipment in our garage to move things around easily. They’re a great way to make use of all available space. You can buy them at any snowmobile shop, or on the internet.”

From the archive · Full text
Reader shop tip

Phil Torrone

Phil Torrone

He says aluminum foil makes a great rust remover. Just fold up a sheet, wet it lightly, and rub it over rusty metal areas. Rust and other buildup will disappear with minimal scratching no matter what kind of metal. It’s cheap and works fast.

From the archive · Full text
Reader shop tip

Rachael

Rachael, Crowe, Skull Valley, Ariz

“When a low pressure fuel line failed on my 1991 Dodge diesel pickup, the dealer said he wouldn’t work on it, and that I should either go to a junkyard or get a new truck. Instead, I cut above the failed section with a hacksaw, installed compression fittings, and replaced the line with a bent piece of 5/16-in. copper tubing. It worked just fine.”

From the archive · Full text
Reader shop tip

Mark Johnson

Mark Johnson, Baudette, Minn.

“To lube sealed bearings, just drill a 1/6-in. hole in the metal part of the bearing and use a needle to inject the lube. I’ve used the idea on CV joints, U-joints, bike axles, bike ped-als, etc. After injecting grease, the hole can be sealed with tape or some other sealer, if necessary.”

From the archive · Full text
Reader shop tip

J. Wayne Green

J. Wayne Green, Millgrove, Ontario

“In gearboxes with leaky seals that use 90 weight gear oil, I fill the box about half full of grease instead of using oil. This isn’t recommended for any gearbox that runs for long periods of time but I’ve had good luck on equipment that runs for shorter times – like 4 to 5 hrs. at a time.”

From the archive · Full text
Reader shop tip

Kenneth Gadd

Kenneth Gadd, Moose Jaw, Sask.

Sliding barn doors are often hard to open or close. Kenneth made it a lot easier by mounting hand-cranked winches on the doors along with a pulley. He hooks the cable up one way to open the door and the other way to close it. He especially likes the idea in the winter.

From the archive · Full text
Reader shop tip

Dennis Drake

Dennis Drake, Ault, Colo.

“I use Irish Spring bar soap to keep mice out of tractors, tanks, combines, and buildings around the farm. I cut bars up into 6 pieces and put them wherever mice are a problem. In buildings, I put them by shop doors.”

From the archive · Full text
Reader shop tip

Doug Pinder

Doug Pinder, Lister, B.C.

“In the last issue of FARM SHOW, Ben Page, Skiatook, Okla., told about his trouble with his Vicon RP 1210 round baler. He had problems keeping the tailgate locked. I had a similar problem with a 510 Deere baler. The problem was air leaking into the roller chain oil tank. I solved the problem by cutting off the line from the tank and oiling the chains manually.”

From the archive · Full text
Reader shop tip 1 of 2

Marlin Mullins

Individual tip 1 of 2 from this reader’s published contribution.
Marlin Mullins, Terry, Miss.

“When rebuilding old fences, often times the metal T posts are bent at the ground when pulled, or they’re very rusty below ground. I have found you can cut off the bottom and weld another piece on quite easily. Typically, three old posts can be used to make two refurbished posts. If you add a bit of primer they can be good to go for many more years of use.

From the archive · Full text
Reader shop tip 2 of 2

Marlin Mullins

Individual tip 2 of 2 from this reader’s published contribution.
Marlin Mullins, Terry, Miss.

“I put an old solid-core door on top of a hospital-type gurney cart. Makes a very handy portable workbench. I also made several small caster carts that are about 2 by 2 1/ 2 ft. in size, fitted with four caster wheels. I use them to hold repair projects and to hold shop equipment and supplies. By putting nearly everything in my shop on wheels, I can easily move things around for cleaning or to make space for larger projects.”

From the archive · Full text
Reader shop tip

Leonard Seltzer

Leonard Seltzer, Manhattan, Ill.

“Too many people die in grain bin accidents when they get pulled down into the center of the bin and suffocate. A simple safety precaution is to tie a rope to the top center of the bin, which will provide something to hang onto. The rope should extend to within 2 ft. of the bottom of the bin. Putting knots in the rope will make it easier to hang onto.”

From the archive · Full text
Reader shop tip

Clarence Peterson

Clarence Peterson, Menasha, Wis.

“My pressure washer is equipped with a rubber suction hose that leads down into a tank full of soapy water. Unfortunately, the plastic pipe tends to curl up so much that it comes out of the water and can’t suck out the solution. To solve the problem, I installed a 1-ft. length of 1/2-in. dia. copper pipe at the top of the suction hose, which keeps the hose nice and straight. I also put a cotter pin through both pipes to hold them together.”

From the archive · Full text
Reader shop tip

Mark C. Williams

Mark C. Williams, Dacoma, Okla.

“I always buy genuine original equipment replacement parts and use only factory-recom-mended lubricants. Also, I change fluids more often than the company recommends. It pre-vents a lot of problems.”

From the archive · Full text
Reader shop tip

Larry Schoberg

Larry Schoberg, Union, Iowa

“I operate a farm machinery repair shop and go through a lot of oil. This high-rise barrel rack makes it easy to store various fuels and chemicals. The rack is made out of channel iron and square tubing and extends almost as high as the shop’s ceiling. It had been built by someone else and I bought it at an auction. I store 50-gal. oil barrels on the rack’s shelves, and I use a gear-type pump to fill them and also to drain out the oil as needed.”

From the archive · Full text
Reader shop tip

Joe Riccobuano

Joe Riccobuano, Pittsburg, Calif.

“I use broken hay tines to store washers. The tines in the photo are off an old Owatonna swather. I slide a tag on with the size next to the washers, and I hang each tine by its coil on a peg-board. The system eliminates any guesswork about the size washer I need. If I’m working on something and don’t know how many washers I’ll need I just take the whole tine with me.”

From the archive · Full text
Reader shop tip

Charles H. Bratton

Charles H. Bratton, Albuquerque, New Mexico

“The drive cable on string-type weed trimmers has to be greased frequently, a job that requires removing the entire drive assembly. To make it easier, I drilled and tapped a 1/4-in. by 28-in. thread and installed a grease zerk at the base of the trimmer head shaft housing. Then midway from the trimmer head to the engine mounting, I drilled a 3/16-in. dia. hole in the housing. I use a pointed grease adapter with a grease gun and pump in four or five shots of grease. To keep dirt out I put a 3/4-in. hose screw clamp over the hole and tightened it. It’s a quick, easy solution.”

From the archive · Full text
Reader shop tip 1 of 2

Charles Fink

Individual tip 1 of 2 from this reader’s published contribution.
Charles Fink, South Woodstock, Ct.

“I always carry Epoxy plumber’s putty with me. It’s like having instant plastic/rock and is very versatile. By combining the putty with wire and a bent nail I was able to repair the regulator on an air compressor, and it has lasted for 1 1/2 years. Considering all the vibration on an air compressor, I think that’s pretty good.

From the archive · Full text
Reader shop tip 2 of 2

Charles Fink

Individual tip 2 of 2 from this reader’s published contribution.
Charles Fink, South Woodstock, Ct.

“Silicone caulk is another product that’s always handy to have close by. It can be used as an electrical insulator, adhesive, and vibration dampener, and also to mold parts.”

From the archive · Full text
Reader shop tip

Kevin Thomas

Kevin Thomas, 60478 S.E. 30 th St., Pratt, Kansas 67124 ph 620 388-1895

“As an employee of the Kansas Department of Transportation, I came up with this utility truck-mounted toolbox. It fits between the truck’s frame and snowplow mounting bracket and measures 34 1/2 in. long, 12 in. wide and 9 1/2 in. high.

“I can access the toolbox whether the snowplow is on or off, and I can raise or lower the snowplow with no interference from the toolbox even when the lid is open. There’s room for the truck hood to be opened as the toolbox fits between the hood and truck frame.

“I built it because we’re required to carry certain tools with us on the job. We had been using a toolbox that bolted onto the side of the truck frame, but it was so heavy that it broke the mounting bolts. Now our tools are always where we need them. I’m looking for a manufacturer.”

From the archive · Full text
Reader shop tip

Cliff Danke

Cliff Danke, Gloversville, N.Y.

“Removing allen head set screws from shaft and bearing collars can be a real pain if the screws won’t budge.

“One day after trying in vain to remove a set screw, out of frustration I hammered on the collar just outside the edge of the set screw with a hammer and punch. Imagine my amazement when I inserted an allen wrench and the screw came right out. I’ve used this method a number of times now, and it works almost every time. Be careful, though, not to hammer too close to the threads or you’ll peen them down too far away and they won’t work. All I can say is, this method works for me.”

From the archive · Full text
Reader shop tip

Galen Garber

Galen Garber, Conneautville, Penn.

“Installing heat in the floor of my shop was the best thing I did when I built the shop 10 years ago. The only thing I’d do different would be to use some of the better products that are available now.”

From the archive · Full text
Reader shop tip

Edward Welters

Edward Welters, 14307 LCR 2190, Verona, Mo. 65769 ph 417 498-6496

“I’ve come up with heavy duty diesel intake valves that are designed to replace and fit all Moline diesel head intake valves. The stem is .005 thicker and the head is a .010 thicker margin and has a flathead surface. You very seldom have to replace guides with this thicker-stemmed valve - just ream your old guide to fit the new valve. That will save you time and money, as changing guides does cost money. It’ll also save your engine head from possible cracking when pushing the old guides out. Also, the valve head is enough thicker to bring it up to specs and gain compression on the used seats.

“These heavy duty valves are also available for the 354 Perkins in the intake and exhaust valves.”

From the archive · Full text
Reader shop tip

Fritz Groszkruger

Fritz Groszkruger, Dumont, Iowa

“I use starting fluid to clean grease off my hands and to clean out hydraulic outlets. Whenever my hands are greasy and I have to handle something else, I just spray a little ether on my hands and wipe them on my pants. Also, it’s a snap to get dirt out of hydraulic outlets using a spray can of ether.”

Shop feature stories

From the archive · Full text
Feature story

Big Tumbler Cleans Parts Safely

Featured source: John Sloane

Forget about sand blasting or wire brush cleaning delicate or hard to replace parts. The Eastwood jumbo parts tumbler can clean parts up to 10 in. long, removing build-up and bringing them to a mirror shine. The tumbler uses vibration, not rotary action, to clean parts.

John Sloane, Eastwood Company, says, “The most common use of our tumbler is for small brackets and hardware from collector cars. The tumbler lets you load it up and forget it, with only periodic checks to see if the parts have reached the desired stage.”

The key to the tumbler’s effectiveness is the media or material used in the tumbler and the adjustable vibration, from mild for gentle cleaning to aggressive for quicker cleaning. Eastwood sells a wide variety of media from plastic pyramids to ceramic and hardwood cubes. The plastic and ceramic media are impregnated with an abrasive. One media, Dry Shine, is treated corncob pieces. It is used to produce the mirror shine on metal. Additives such as Fast Etch, a dilute phosphoric acid solution, leave a protective coating on the cleaned metal.

“Fast Etch will inhibit rust for a while, but it is good to get freshly cleaned steel or iron recoated,” says Sloane.

“However, tumbling won’t leave it as oxygen hungry as sandblasting.”

Some media will wear away faster than others, and most media will need to be cleaned periodically. Hardwood cubes and corncobs may need to be refreshed occasionally, as well. However Sloane reports using a tumbler for 7 days straight with no discern-ible change in the media size.

“You can overdo it, but tumbling is a more controllable process, and you can stop before you actually damage tolerances,” he says.

Eastwood’s jumbo tumbler features a high-density, polypropylene, 22-in. diameter bowl. It can hold up to 50 lbs. of media and parts and sells for $549.99.

Contact: FARM SHOW Followup, The Eastwood Company, 263 Shoemaker Rd., Pottstown, Penn. 19464 (ph 610 705-6284; toll free 800 345-1178; [email protected]; www.eastwood.com).

From the archive · Full text
Feature story

Deere “Compresserator” Pumps Air, Electricity

Featured source: John Deere

Need air pressure to run some tools and electricity for others? Now you can power both types of tools with one machine - the Compresserator from Deere.

Compresserators come in a portable wheeled model and a larger skid model. The portable model is ideal for smaller, short-term jobs where limited output is needed. It’s powered by a 6.5 hp Honda OHV gas engine. The single-stage compressor pumps out 10.9 cfm at 125 psi, while the 120-volt, brushless alternator produces 600 watts continuous on-load current and 1,600 watts continuous off-load current. It’s priced at $1,545 suggested retail.

The 425-lb. skid mount unit is designed for larger jobs and for mounting in a trailer or on back of a truck. It’s powered by a 13 hp Honda OHV. Its two-stage air compressor puts out 15.7 cfm at 175 psi side by side with the brushless, 12-volt alternator. The alternator produces 2,300 watts on-load output and 3,300 watts continuous off-load output. Suggested retail price is $2,155.

Both models feature heavy-duty, steel base-plate assemblies to reduce vibration and a 14-gauge powder-coated, two-piece belt guard with 1/4 turn release for quick access.

The Compresserators are equipped with 8-gal. twin tanks and gauges for tank and outlet pressure readings as well as a stainless, braided, discharge hose. A full set of air compressor and generator accessories are available, including an electric start option. It adds $319 to the price and doesn’t include battery or cables.

Contact: FARM SHOW Followup, Local Deere Dealerships or may be ordered online at www.jdparts.deere.com.

From the archive · Full text
Feature story

All-Steel Workbench Built For A Lifetime

Featured source: McTavish Steelworks Ltd.

If you’ve got a tired, worn out workbench in your shop, take a look at this heavy duty steel bench made by McTavish Steelworks. The 10-ft. long work bench is made from 16-gauge steel. It has easy roll-out, heavyweight supporting drawers that measure 22 in. wide. The drawers are equipped with 10-gauge roller bearings that can support up to 100 lbs. or more.

The workbench’s counter is 10-gauge steel and can easily support vises and other heavy tools. A layer of 1 1/2-in. deep wood under the counter dampens sound when working.

The top drawer measures 5 in. deep; the middle two drawers 6 1/2 in. deep; and the bottom drawer 9 in. deep. The workbench comes in black with either blue or orange drawers. It weighs about 2,000 lbs.

Sells for $2,700 (U.S.) plus S&H. Contact: FARM SHOW Followup, McTavish Steelworks Ltd., P. O. Box 302, Rosenort, Manitoba, Canada R0G 1W0 (ph 204 746-6591; fax 204 746-2998; mctavish [email protected]).

From the archive · Full text
Feature story

Closing Wheel Pivot Kits For White Planters

Featured source: RK Products Inc.

Tougher, more durable, closing wheel frame pivot kits are now available for White planters. RK Products offers the kits to fit 5000, 6000 and 8000 Series White planters. OEM and most aftermarket kits provide a pivot that relies on two steel surfaces slipping on each other. Uneven wear can cause the closing wheels to go off center. The RK kit replaces steel on steel with long lasting bearings to keep closing wheels on center and to maintain optimum seed-to-soil contact.

The kits offer a square shaft with tapped holes to mount 203 series ball bearings and to replace the original pivot shafts. Tubular bearing housings are provided to weld to the pivot arm outside surface.

The kits are priced at $19 per row.

Contact: FARM SHOW Followup, RK Products Inc., 3802 Jean Street, East Moline Ill. 61244 (ph 309 792-1927 or 800 580-6818; fax 309 792-1924; [email protected]; www.rkproducts.com).

From the archive · Full text
Feature story

How To Rebuild, Or Repair, An IH Cub

Featured source: Dan Steiner

Few antique tractors are as popular as the IH Cub. With so many still in use or being re-stored, there’s a good market for parts.

“We offer more than 100 remanufactured parts for Cubs,” says Dan Steiner of Steiner Tractor Parts.

“We try to build parts as close to the original as we can.

“ Newly available Cub parts include a clutch throwout bearing, a padded seat with springs in the base, original design carburetors, two-terminal starter switches, and front grill panels with screens.

“Collectors want parts to look like factory-installed parts,” says Steiner.

“There are very few parts we build that don’t sell really well.”

Steiner cites the Cub radiator cap the company offers as an example of the search for authenticity.

“The cap available from dealers wasn’t the original design,” he recalls.

“We found a dusty, old, original cap on a dealer’s shelf and copied it. Our orders went from 10 a month to more than 100.”

In all, Steiner now carries more than 4,000 parts for older model American-made tractors. The Farmall list alone goes back to the early 1930’s models, starting with the F12.

In some cases, new is better than old. Such was the case with the clutch throwout bearing for the Cub.

“The original factory throwout bearing had a fixed graphite center,” explains Steiner.

“We designed a true bearing in the middle, not graphite, and offered it at the same price.”

The new Cub carburetor goes for $225, while the two-terminal starter switch sells for just $19.95 and the front grill with screen sells for $248.

From the archive · Full text
Feature story

IH Engine Keeps Belarus Going

Featured source: Jim Ward

The Belarus 1790 4-WD tractor is built like a tank with features that set it apart from many of its day, says Jim Ward. But one problem with the old workhorse is its engine. Obsolete and with few parts available, it is a problem for owners. That’s where a machinist like Ward can help.

“I had a customer with a blown engine in a Belarus 1790,” says Ward.

“He wanted to replace it with a 466 DDT International, but the bell housing and engine block face are completely different.”

Ward’s first step was to extend the frame by close to a foot to make room for the in-line IH 6-cylinder. He then fabricated an adapter ring to fit the bell housing to the engine.

When Ward pulled the Belarus engine out, he discovered another problem. Unlike North American tractor brands, there were no indicator marks for lining up the bell housing with the center of the new engine shaft.

“If you don’t get it lined up just right, the clutch will hang up and not release,” explains Ward.

“It is important that the clutch plates are free when the clutch is disengaged.”

Ward fabricated a temporary shaft and, with the aid of shims, marked his own indicator lines. He also had to fabricate a new throwout bearing assembly to engage the clutch.

“The double clutch on the Belarus is a monstrosity with huge splines that wouldn’t fit on the 466,” says Ward.

“We made our own splines for the clutch plate and used a splined coupler off a ready mix truck. We then made our own input shaft to fit the splines.”

Once he had the engine matched up and bolted up, he made engine mounts to fit the frame. A new loader custom built for the 1790 rounded out the remake. Ward built it with 4 by 6 by 3/8-in. steel tubing. While he built a bucket for the loader, the main use is for pushing snow with a large blade fashioned from an old grader blade.

“The frame had to be built tough to handle the manhole covers it hits,” explains Ward.

“We put support wheels on the blade for transit. To lighten it up, we cut out sections of steel and lined the front with plastic.”

Ward’s customer pushes a lot of snow in and around Missauga, Ontario. Though he has two other large tractor-powered snow blades, the Belarus was ideal for the job. That’s one reason he invested the $10,000 or so in shop time to replace the engine. That was partially offset by $2,500 he got selling the old engine for parts.

“It looks ugly, but it does the job,” explains Ward.

“The 1790 has two air seats, with the operator’s seat on the right hand side that lets him watch the curb as he is plowing snow. The tractor was ahead of its time in many ways with its air seats and the original air-activated clutch and brakes.”

Contact: FARM SHOW Followup, Edenholme Custom Machinery, 1263 Richardson Rd, Minesing, Ontario, Canada l0l 1Y0 (ph 705 728-0907 daytime; 705 735-2172 evening; fax 705 735-2171).

From the archive · Full text
Feature story

1955 Deere 420C “Track-Tor” Gets Big-Time Tune-Up

Featured source: Frank Ziegelmann

When the rockershaft casting broke on his 1955 Deere 420C track-type tractor, Frank Ziegelmann of Colfax, Calif., replaced it with a welded-up angle iron framework.

He also made several other key modifications to the tractor, including adding a hydraulic multi-outlet block that allows him to perform multiple functions on both front and back of the tractor.

“This is a popular tractor - anyone who owns one doesn’t want to part with it. The changes I’ve made converted it into a much more versatile working tractor,” says Ziegelmann.

The rockershaft had already broken twice, and Ziegelmann got tired of welding it back together.

“The only replacement rockershaft I could find was one that had been repaired. They wanted almost $2,000 for just the casting alone.”

His solution was to use 4-in. angle iron to build an upside down U-shaped frame, which he bolted on in place of the original casting. Then he unbolted the original rockershaft assembly from the tractor’s final drive and differential housing, pulled the shaft out of the casting, and installed the rockershaft in the new frame. Both ends of the rockershaft bolt to the tractor’s original outrigger yoke arms and run through a pair of bearings made up by a local machinist.

“It looks exactly like the original but is built much stronger. It should last a lifetime,” says Ziegelmann.

The bottom part of the tractor’s 3-pt. is equipped with a ball hitch, allowing Ziegelmann to pull a scraper or even a small disk. A vertical cylinder that he added to the right side of the 3-pt. linkage is used to change the angle of the blade. Extending the cylinder causes one side of the blade to go down, which sets the blade at an angle.

“It works great for cleaning out ditches,” says Ziegelmann.

A big cylinder on the left side of the tractor is used to raise or lower the 3-pt.’s lower lift arms.

Three levers mounted on the tractor’s right fender are used to control all hydraulic operations. One hose goes to a hydraulic cylinder that he mounted on the center link of the tractor’s 3-pt. hitch.

“The center link connector is used to adjust the angle of the 3-pt.’s top link. Originally, you had to turn a crank up or down to adjust it. Now all I do is pull a hydraulic lever,” says Ziegelmann.

The front of the tractor is equipped with 6-ft. wide blade fabricated by a local shop. The blade can be raised or lowered by a hydraulic cylinder that he added on front of the tractor. The top part of the blade bolts onto mechanical linkage that also bolts to the tractor. Blade angle is adjusted by changing the position of a steel pin in the linkage.

The blade is supported by a steel frame that goes all the way back to the tractor’s main frame between the tracks.

The blade can be replaced with a 4 1/2-ft. wide, 2-ft. high bucket. To dump the bucket, Ziegelmann removes the mechanical link and replaces it with another hydraulic cylinder.

“I’ve moved a ton of dirt with the bucket,” says Ziegelmann.

“I can raise it only about 1 ft. high. But by driving up a ramp I can get high enough to dump into a truck.”

The last change Ziegelmann made was for comfort. He replaced the tractor’s original metal and leather seat with a large, comfortable one that he bought at an office warehouse. He also made a frame to fit the 4-bolt pattern that had secured the original seat.

“The seat can be slid forward or backward on a homemade hinge, and secured in place with a pin,” notes Ziegelmann.

Contact: FARM SHOW Magazine, Frank E. Ziegelmann, 19009 Geisendorfer Rd., Colfax, Calif. 95713 (ph 530 878-0892).

From the archive · Full text
Feature story

Airchamber Protects Collectible Vehicles

Featured source: Kevin Dittler

Anyone who has spent hundreds of hours or thousands of dollars restoring a vintage car, truck or tractor will be interested in these new pressurized Airchambers which provide total protection from dust, humidity and pests.

Kevin Dittler of Mesa, Arizona, discovered Airchambers while searching for an inexpensive way to protect one of his cars. Made in Britain, it was too expensive to import just one unit. So Dittler decided to become the U.S. distributor.

The portable Airchamber has a frame made of fiberglass poles. A fan pumps in air. If you ever lose power, the frame still holds it up, notes Dittler.

There are other “frameless” shelters around but if they collapse, moisture can condense and damage paint jobs.

Airchambers come in various sizes from small for motorcycles to a 22-ft. by 7-ft. 3-in. by 5-ft. 11-in. tall chamber. Some tractor restorers have adapted the units by shorten-ing the side frames and increasing the center height, Dittler adds. He knows of one tractor restorer who keeps parts in a unit. Some customers with horses in humid climates protect their tack and blankets inside Airchambers.

Because of easy access doors, restorers can go inside the chamber to do work. The floor, a durable nylon-plastic weave, repels oil, antifreeze and brake fluid. Airchambers also make it easier to take a vehicle in and out. Dittler knows one 1956 Porsche owner who never drove his car because it was so difficult to get at. With the Airchamber he drives it often.

Airchambers cost $599 for a motorcycle size to $979 for the largest units. Dittler emphasizes that Airchambers must be used inside a barn or building. He’s working on adding a line of portable outdoor units that can handle snow loads and wind shear.

Contact: FARM SHOW Followup, Kevin Dittler, 1307 N. Los Alamos, Mesa, Arizona 85313 (ph 888-992-6773; [email protected]; www.copperstarproducts.com).

From the archive · Full text
Feature story

Not Just Another Hardware Store

Featured source: Randy Anderson

Need a 4-in. dia. nylon rope or a shoe leather sewing machine, or perhaps a turret top for the military version of a Humvee? How about a rail car full of baking soda, one of 500 different ammo cans?

Those items and thousands more are available at 10 Mac hardware stores in Minnesota, North and South Dakota or at the company’s website.

“Not just another hardware store” is more than just the company’s slogan.

“The company was founded on surplus equipment sales in 1932, but gradually added traditional hardware store items over the years,” explains Randy Anderson, a former store manager and now corporate sales manager.

“We constantly get manufacturers and others coming to us and saying they are phasing out equipment, or a company will decide to finally get rid of excess materials stored in an old warehouse.”

Anderson describes his 20 years managing a Mac store as being like a kid in the candy store. He never knew what was in a delivery truck until the door opened. Today he is on the corporate side, and it is still exciting. He admits, however, that surplus is getting harder to find as manufacturers go to “just in time” orders. Still, government surplus sales and walk-ins keep life interesting and the stores full.

Anderson describes the company stores as places to get ideas or places to turn ideas into reality.

“Somebody will have an idea for using big foam pads or tell a friend who will,” he adds, describing the word of mouth that is their best promotion.

The turrets mentioned earlier had been built for Humvees intended for the military market. When the vehicles were sold instead to the civilian market, the turrets were removed and eventually found their way to Mac’s. Once the word got out to Humvee owners, calls came in, and the turret tops disappeared.

“We had a call from a guy in the military in Hawaii,” says Anderson.

“He had heard about them and bought one, asking us to store it for two years until he got out.”

Anderson suggests calling one of the stores if you are looking for a particular item, as no central catalog exists. You can also check one of the websites. Store locations and phone numbers are available on the company website or by calling the company office.

Contact: FARM SHOW Followup, Mac’s Hardware, 5970 50th Avenue South, P.O. Box 1118, Moorhead, Minn. 56561 (ph 218 233-4600 or 800 373-6227; fax 218 233-3363; [email protected]; www.macshardware.com).

From the archive · Full text
Feature story

Truck Transmission Used To Start Dead Tractors

Featured source: Larry Randall

Larry Randall, Springport, Mich., collects old farm tractors, mostly N series Fords plus a couple of Fordson Dextas. Sometimes the tractors sit for a long time and become difficult to start.

He didn’t want to tow the tractors to start them because that requires another person, and sustained cranking can be hard on the tractor to start them.

Instead, he came up with the idea of using a 4-speed truck transmission to start dead tractors through their pto shafts. He welded a GM pickup transmission to a 3-pt. hitch frame off an old implement, then mounted the frame on the 3-pt. hitch on his 1952 Ford N tractor. The input shaft on front of the transmission was too long so he cut it down and then welded a U-joint onto it. He also mounted a big yoke on the output shaft on the back side of the transmission in order to support a 3-ft. long telescoping driveshaft. The driveshaft hooks up to the dead tractor’s pto.

To start a dead tractor, he puts the transmission in reverse, hooks up the driveshaft to the dead tractor’s pto, and engages the pto. The driveshaft engages the dead tractor’s gearing and turns the engine over in the right direction.

“It took a lot of thinking to get it figured out. I spent a lot more time building it than I’ll ever spend using it,” says Randall.

The transmission’s output turns in the right direction to crank the dead tractor through its pto shaft.

“If I hooked up a driveshaft directly between two tractors, the problem is that it would turn in the wrong direction and ruin the engine,” explains Randall.

The transmission turns the engine over only slightly faster than the starter does, so the engine doesn’t spin too fast, says Randall.

“The dead tractor’s transmission has to be in neutral and you have to put its pto in gear in order to make this idea work. I bolted a pair of steel plates onto the transmission’s bell housing to block the gearshift lever so it can’t be put in any gear except neutral or reverse.”

You have to use a transmission with a slow reverse and creeper gear in order to get the proper gearing, he says.

“The transmission I used came off a 1970’s 3/4-ton GM pickup and has a 7 to 1 reduction. The gearing on the dead tractor has a 4 to 1 ratio so it’s cranking the dead tractor’s engine at about 400 rpm’s which is about the same speed as the starter would.”

Contact: FARM SHOW Followup, Larry Randall, 26104 V Dr. North, Springport, Mich. 49284 (ph 517 857-2387; lrand @voyager.net).

From the archive · Full text
Feature story

Proven Pre-Filter Keeps Air Clean

Featured source: Rich Behnke

The best technology is simple technology, and you can’t get much simpler than the Enginaire precleaner for air intakes. For 30 years it has been cleaning coarse particles out of air before it reaches the air filter. By doing so, it saves engine owners money and time.

“Our research has shown that you can extend filter life by up to 12 times, save 10 percent on fuel costs and 15 percent on oil costs,” says Rich Behnke, Enginaire.

“It also cuts engine maintenance by up to 25 percent, re-duces engine downtime by up to 50 percent and extends engine life by up to 25 percent.”

The precleaner is powered by air being drawn into the engine air filter. The airflow causes an impeller to spin at up to 3,000 rpm. The centrifugal action pushes particles larger than 15 microns (less than 1/25,000 of an inch) to the outside of the precleaner chamber. From there, the particles are forced out of the discharge port. The now cleaner air is drawn through the precleaner’s plenum and into the vehicle’s air filter.

“The precleaner comes in 6 different sizes for motors from 1.5 to 400 hp.,” says Behnke.

“We get a lot of people who try one and then order more for other vehicles. It works as well with 5 hp concrete saws and zero turn lawn mowers as it does with compact tractors or heavy equipment.”

Companies like Kubota install it on equipment going to areas overseas that lack local service centers. Behnke stresses that precleaning air is especially helpful when service/maintenance can be a problem.

Prices range from $50 for the smallest precleaner to $750 for the largest. All units have a lifetime warranty.

“We’ve even honored our warranty when a unit was broken because the operator backed under a tree,” say Behnke.

Contact: FARM SHOW Followup, Enginaire, 122 S. River St., Janesville, Wis. 53545 (ph 608 755-5466 or 800 359-1704; fax 608 755-5460; [email protected]; www.enginaire.com).