Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Issues / Vol. 22, No. 1 (1998)

Vol. 22, No. 1 (1998)

Money-Saving Repairs & Maintenance Shortcuts · Printed section pp. 30–32

30 selected entries · Complete text of selected entries

This issue’s section includes reader tips and feature-length shop stories. Held items and editorial notices are not reproduced.

Archive text: prices, coupons, availability and contact details reflect the original publication, not current offers. Reader methods are not universal instructions; follow manufacturer guidance and proper safety practices.

Reader shop tips

From the archive · Full text
Reader shop tip

George “Bing” Ribble

George “Bing” Ribble, Hettick, Ill.

“I built this high pressure washer out of a re-built compressor from a local car wash. It’s powered by a 5 hp electric motor off an old silo unloader. I added a second pulley to the compressor to get the rpm’s up high enough to develop 2,000 psi for washing. An old car jack installed between the motor and the pulleys serves as a belt tightener.

“The machine mounts on a cart built out of sq. tubing and fitted with two old lawnmower wheels.

“A garden hose connects the pump to any standard water faucet. Out the output side, I use 50 ft. of 1/4-in. dia. hydraulic hose and a wand-type spray nozzle.

“It didn’t cost more than $200 to build and works as well as any commercial unit to keep my equipment clean.”

From the archive · Full text
Reader shop tip

George Holsapple

George Holsapple, Jewett, Ill.

George uses old bags of seed corn as a cheap source of fuel to heat his 54 by 54-ft. shop. He burns the corn in a three-year-old A-Maize-Ing Heat furnace (Big M Mfg. Co., R.R. 3, Box 319A, Taylorville, Ill. 62568; ph 217 824-9372).

“This is the perfect way to get some use out of old seed corn you can’t use anymore,” George notes.

“Friends give it to me for nothing and I usually have some left over myself. The furnace uses about 3 bu. per day to heat the shop to 60 to 70 degrees, even when it’s 0 degrees outside. Besides keeping the 10 bu. hopper full, the only other maintenance is re-moving clinkers from the bottom of the furnace.”

From the archive · Full text
Reader shop tip 1 of 2

Chop Gibson

Individual tip 1 of 2 from this reader’s published contribution.
Chop Gibson, Scranton, Iowa

“I have a Sukup bin unloading auger that had trouble with the roller chain which kept jumping off. I replaced the sprockets with larger ones to try to solve the problem. It worked.

From the archive · Full text
Reader shop tip 2 of 2

Chop Gibson

Individual tip 2 of 2 from this reader’s published contribution.
Chop Gibson, Scranton, Iowa

“I built a cart in my shop for a hauling bulk oil barrels. I installed a pump on the barrel so that when I changed oil, I pushed the cart over to the tractor or vehicle to pump in the new oil. There’s a meter on the pump.”

From the archive · Full text
Reader shop tip

Gregory L. Reif

Gregory L. Reif, Claflin, Kan.

“I needed a transmission jack but couldn’t jus-tify a new one so I built my own. I used two pieces of 3/8-in. thick steel plate - one 18 by 18 in. and the other 10 by 10 in. I welded a scissor jack between the two plates. Four swivel casters under the bottom plate let me roll it all over the shop. A 1/2-in. drive ratchet raises and lowers the jack easily even with a transmission resting on it. I welded eyes to the sides of the top plate for tie downs.

From the archive · Full text
Reader shop tip

Levi Adams

Levi Adams, Locke, N.Y.

“I’ve discovered that pto shafts run better if you do not grease them as much as the rest of the machine it’s mounted on. Usually once for every three or four times is sufficient.”

From the archive · Full text
Reader shop tip 1 of 2

Dan Petersen

Individual tip 1 of 2 from this reader’s published contribution.
Dan Petersen, Curtice, Ohio

“I need help. The battery on my Massey Ferguson 180 tractor won’t charge. Everything electrical has been replaced, from the alternator to the gauge. It still won’t work.

From the archive · Full text
Reader shop tip 2 of 2

Dan Petersen

Individual tip 2 of 2 from this reader’s published contribution.
Dan Petersen, Curtice, Ohio

“I use a $2 notebook to keep track of equipment maintenance. I divided it into sec-tions for everything from the lawn mower up to the combine. I write down everything I do except for adding fuel. As we get older, a year or two can go by awful fast.”

From the archive · Full text
Reader shop tip

Stephen Painter

Stephen Painter, Lomax, Ill.

He made a chain oiler for his New Holland cornhead using a piece of 4-in. dia. pvc pipe. He capped each end and installed a 12-volt spray valve in one end. He fills the pipe with oil. A 12-volt switch in the cab controls the oiler.

From the archive · Full text
Reader shop tip 1 of 2

Eugene Alt

Individual tip 1 of 2 from this reader’s published contribution.
Eugene Alt, Audubon, Iowa

“We replaced the steel tube on our Deere planter’s cross auger with a piece of 6-in. dia. pvc pipe.

It works as well as the original and will never rust or corrode.

“We had a fabrication shop form a ‘saddle’ out of sheet metal for the pipe to fit into. The saddle bolts to the original Deere uprights. The pipe simply sits in the saddle and is strapped in place. Slots were cut out of the pvc for the fertilizer to drop out of. You have to be careful to get the dimensions right so the boxes fill properly. We were able to use all the spacers, end pieces and the hopper from the original auger.

From the archive · Full text
Reader shop tip 2 of 2

Eugene Alt

Individual tip 2 of 2 from this reader’s published contribution.
Eugene Alt, Audubon, Iowa

“One handy idea we use in our shop is to wire a length of heavy extension cord directly to a wall outlet. We curl up the cord and hang it on the wall. That way it’s always there when you need it and it can’t come un-plugged.”

From the archive · Full text
Reader shop tip

Paul Knauer

Paul Knauer, Elizabeth, Ill.

“After the 407 cu. in. engine blew up in our late 1960’s IH 856 tractor and ruined the crankshaft, we decided that the cost of a new crankshaft and a complete overhaul - at about $6,500 - was more than the tractor was worth. We located a junked-out 1976 IH 915 combine equipped with a good DT 414 turbocharged engine which we bought for $1,600. We then went to a salvage yard and purchased an oil pan, oil pump pickup tube, and a rear mounting plate designed for an IH 1066 tractor. We had to lengthen the 856’s side rails by 1 1/2 in. and drop the rails about 1 in. in order to make room for the engine.

“We bought a new aftermarket flywheel and installed a 1066 clutch, which fit perfectly. We also had to reroute the lower radiator hose from the left side to the right side, using exhaust tubing fitted snug against the bottom rear of the radiator. And we had to move the exhaust hole in the hood back about 1 1/2 in. We picked up an air cleaner designed for an IH 966 tractor and fitted it under the hood. We added a band strap to the rear of the front hood in order to lengthen the hood so we could keep the radiator hole in the original spot.

“The repower job went so well that I doubt the average person would even notice. We were able to sell the old 407 engine to a rebuilder so our total out-of-pocket expense was only about $2,000. With no pump adjustments we ended up with 140 hp. We’ve used it for two years with no problems. It looks sharp and has worked beautifully.”

From the archive · Full text
Reader shop tip

Dan P. Snyder

Dan P. Snyder, Odebolt, Iowa

Dan had trouble remembering to shut the engine compartment door on his 1990 Deere 9500 combine whenever he opened it during harvest. So last summer he rigged up an automatic door closer for his combine that’s adaptable to all Deere 9000 series machines.

It consists of a 10-ft. length of 1/8 in. dia. aircraft cable attached to the engine compartment door and to the fold-out steps. The cable runs under the latch that holds the door open.

“When you push the steps in, the cable tightens and automatically closes the door - no more having to climb back up the steps to do it when you forget,” Dan says.

“It took a while to figure out exactly what length the cable needed to be, but it’s working so well that I plan to build the units to sell.”

Contact: FARM SHOW Followup, Dan P. Snyder, 3532 Ida Ave., Odebolt, Iowa 51458 (ph 712 664-2413).

From the archive · Full text
Reader shop tip

Mark Campbell

Mark Campbell, Coarsegold, Calif.

“In our part of the country, there’s a lot of iron in the water and, consequently, household water filters typically don’t last more than a month. However, I’ve found a way to double the life of the carbon filter on my home’s water line with a simple filter cleaning device.

“I use a piece of 1/2-in. dia. galvanized steel pipe that’s as long as the filter. The pipe has 1/4-in. dia. holes drilled randomly around it for water to flow through. I put a cap on one end and a hose adapter on the other. To use, you simply slip the pipe inside the dirty filter and hook the end of the pipe up to your faucet. The water backwashes out iron, rust and other undesirable deposits.

“This has worked great for me for several years.”

From the archive · Full text
Reader shop tip

Vaughn Havens

Vaughn Havens, Bath, N.Y.

Vaughn built three or four swivel mounts for fluorescent lights to light up even the darkest corners of his 30 by 60-ft. shop.

“They allow us to get light right over our work,” he says.

“I use 10-ft. posts anchored to studs with clamps so posts can swivel 180 degrees. I weld 6 ft. lengths of 2-in. dia. steel pipe to the top of the posts and mount standard 4-ft. long fluorescent shop lights on the end. The lights are wired with individual plugs so they can be used anywhere. They come in real handy and don’t cost more than $35 or $40 in materials to build, including lights.”

From the archive · Full text
Reader shop tip

Gordon Rice

Gordon Rice, Clarion, Pa.

“We carry the world’s largest selection of new replacement parts for older IHC tractors. We stock over 8,000 parts for tractors built between 1921 and ‘39.

“For example, we stock complete head gasket sets and piston rings for these tractors. We also carry a wide variety of less commonly requested specially-made parts such as paper gaskets and brake cables.

“You can’t beat our selection nor our prices.”

Contact: FARM SHOW Followup, Rice Equipment Inc., 20 North Sheridan Road, Clarion, Pa. 16214 (ph 814 226-9200; fax 227-9200).

From the archive · Full text
Reader shop tip

John C. Porter

John C. Porter, Columbia, Tenn.

“We restore ‘paper pulleys’ on antique tractors to like new condition. All you do is send us your old pulley and we do the rest.

“Usually, we can do the work in about a week. In most cases we use manufacturer’s original drawings. We work with a special dense paper board that we’ve been using for years.

“Restoring Deere L and M series pulleys is our most common job, followed by Farmall M and H series pulleys. We restore a total of 55 different pulley models.

“Prices range from $87.50 to $175 plus S&H.

“We also completely remanufacture pulleys on Farmall M’s since we have hubs in stock. Price is $195.”

Contact: FARM SHOW Followup, Paper Pulley Inc., P.O. Box 519, Columbia, Tenn. 38402 (ph 615 388-9099; fax 380-1669).

From the archive · Full text
Reader shop tip

Jim Guarino

Jim Guarino, Alden, N.Y.

If you need a wiring harness for an older model tractor, you’ll want to check out Jim’s business, Agri-Services, which specializes in making like-new wiring harnesses for antique tractors and other equipment.

“We make every attempt to exactly match the original wiring, using braided or plastic covered wire, fabric loom, neoprene tubing, and soldered OEM-type connectors,” says Jim.

“With each harness, we include a numbered connection list which corresponds to the color and number of each wire. We can also supply optional items such as inline fuses, braided loom, spark plug wires and battery cables on request.”

Available for many tractor makes, with Deere harnesses starting at $22. When a customer needs a harness there isn’t an existing pattern for, Agri-Services customizes one from the original harness if the customer supplies it.

Contact: FARM SHOW Followup, Agri-Services, 13899 North Road, Alden, N.Y. 14004 (ph 716 937-6618).

From the archive · Full text
Reader shop tip

John Cooke

John Cooke, Monroe, Conn.

“When I got tired of hitches twisting on my drawbar, I bent a piece of 1/4 by 2-in. scrap iron into an inverted V shape with a flattened apex. I torched a 3/4-in. dia. hole in the flat to accept a Cat # 1 pin and welded the free ends to the drawbar. I welded two balls and a pin to accept a pintle hitch to the bar. Pinned in the top, it has enough movement to prevent bending and raises and lowers on the lift arms almost perfectly.”

From the archive · Full text
Reader shop tip

Ben McIntyre

Ben McIntyre, Harwood, N. Dak.

Ben’s company, Big Tractor Parts, specializes in new and used replacement parts for Steiger tractors.

“We handle at least 100 American-made replacement parts for Steigers built between 1970 and 1997,” Ben says.

“We handle everything from axle components to differen-tials and steering components. There’s a minimum savings of 10 to 25 percent on new replacement parts for Steiger drivetrains. There’s a minimum savings of 50 percent on used parts. We also rebuild transmissions, dropboxes and axles and buy running or damaged Steigers to part out.”

Contact: FARM SHOW Followup, Big Tractor Parts, 3061 165th Ave. SE., Harwood, N. Dak. 58042 (ph 800 982-1769 or 701 281-0286).

From the archive · Full text
Reader shop tip

Perry Bemis

Perry Bemis, Wichita, Kan.

“Want to add wheel alignment capability to your shop but can’t justify the expense of conventional equipment?

“We manufacture and sell what we believe is the most economical, easiest to use wheel alignment tool on the market. Designed specifically for cars and pickups, the portable wheels-off Precision+ Pro Series II system eliminates the need for turntables, slip plates or an expensive, dedicated bay required for a computerized alignment rack. You use it on any flat floor and hang it on the wall between jobs.

“Quick and extremely accurate to use, it includes tripods with digital readouts, alignment bars for toe and caster, adapter plates for all popular cars and light trucks and ‘floor savers.’ It comes with an instruction manual, demo video, and vehicle alignment specifi-cation manual.

“Sells for $1,995 plus freight.” Contact: FARM SHOW Followup, Kansas Manufacturers Inc., 138 South Ida, Wichita, Kan. 67211 (ph 800 565-6871 or 316 264-7865; fax 1614).

From the archive · Full text
Reader shop tip

Myrna Nuese

Myrna Nuese, Marshalltown, Iowa

Myrna’s company, Hawkeye Sales, offers top link cylinder adapters for Cat. II and III 3 pt. that let you angle or level loads from the seat of your tractor.

The adapters join the top link with the hydraulic cylinder and feature a 1 in. dia. hole for Cat. II models and 1 1/4-in. dia. hole for Cat. III models.

They sell for $20 and $22, respectively, plus $5 S&H for the first unit and $1 S&H for each additional unit.

Contact: FARM SHOW Followup, Hawkeye Sales, 108 1/2 W. Linn St., Marshalltown, Iowa 50185 (ph 800 576-8454 or 515 753-8539).

From the archive · Full text
Reader shop tip

Douglas McKenzie

Douglas McKenzie, Stony Plain, Alberta

“I would like to follow up on my article, ‘Working With Diesels In Ford Pickups’, because of all the letters I’ve received asking for advice since it ran in your last issue.

“The new 7.3 Powerstroke, which I didn’t cover, is a somewhat better design than the previous 7.3 but certainly is not worth all the hype that’s been associated with it. Everything I have previously stated should also be applied to the Powerstroke engine, only now it costs more. An electronic fast idle for these engines costs $1,000 to $1,300, or you can use a manual throttle cable for about $300.

“Having repaired the Chevy 6.2, 6.5, Ford 6.9, 7.3, 7.3 turbo, 7.3 Powerstroke and the 5.9 Cummins, if you insist on having a diesel in a 3/4 or 1-ton truck, stick with the B series Cummins.”

Shop feature stories

From the archive · Full text
Feature story

Shop-Built Pipe Bender Good As Factory-Built

Featured source:

Gil Wammen built a portable pipe bender that he uses to make corral panels and legs for feed bunks. The Reva, S. Dak., farmer says it works as well as anything he could have bought.

“You can put bends of 180 degrees in up to 11 ga., 1 1/2-in. sq. tubing,” says Wammen.

He started with a length of 10-in. I beam, mounting it on a wheeled frame built out of 2 3/8-in. dia. pipe. It’s fitted with two 8 in. wheels on one end and a 6 in. caster wheel on the other.

A 4 by 2-in. hydraulic cylinder with 30 in. stroke mounts on top of the I-beam. A car wheel hub fitted with a 16 in. tire rim mounts at one end of the I-beam. Two 2 in.

wide pieces of angle iron weld to one side of the wheel rim. A 1 1/4 in. dia. piece of pipe mounts on the I-beam next to the tire rim. A length of steel cable runs from the cylinder to the wheel rim.

To use, Wammen simply slips a length of pipe between the pipe and rim and turns the rim by rotating the cylinder.

To make different size bends, Wammen simply replaces the 16 in. tire rim with a larger or smaller one.

“It works great,” Wammen says, “and it only cost about $200 to build, including new wheels and hydraulic cylinder.”

Contact: FARM SHOW Followup, Gil Wammen, Box 35, Reva, S. Dak. 57651 (ph 605 866-4683).

From the archive · Full text
Feature story

Electronic Ignition Kits For Older Tractors

Featured source:

“Our new electronic ignition kit for older model tractors allows gas to be burned more efficiently and eliminates the need to change points,” says Jim Lee of CBS Performance Automotive, Colorado Springs, Colo.

The “Ignitor” is a bolt-on module that replaces the points in the distributor. A magnetic sleeve slides onto the distributor shaft and onto cam lobes that would normally trigger the points. As the distributor shaft spins, the magnets trigger the module to let it know when to fire.

“It increases the tractor’s horsepower by burning a greater percentage of the gas,” says Lee.

“Points often misfire which causes inefficient burning of the gas and a drop in power. Our electronic ignition kit, on the other hand, remains at a constant 100 percent of whatever the coil can produce. The magnetic signal penetrates any dust that may be in the gap. The components are completely sealed against moisture, grease, dirt, and oil.

“The unit is designed for tractors made after 1965 equipped with 6-volt distributors.”

Units designed for Deere tractors sell for $99 while ones designed for International tractors sell for $109.

Contact: FARM SHOW Followup, CBS Performance Automotive, 2605-A W. Colo-rado Ave., Colorado Springs, Colo. 80904 (ph 800 685-1492; fax 719 633-6765).

From the archive · Full text
Feature story

Portable “Workshop” Mounts On Pickup Bumper

Featured source:

“You can set up a portable mini workshop on any pickup equipped with a square bumper hitch receiver, allowing you to do a variety of jobs right in the field,” says Joe Locklear, Locklear Electric, Inc., Wood River, Ill.

The “Hitch It All” consists of a telescoping square steel arm with a flat steel plate on top. The plate has holes in it, allowing you to bolt on a bench vise. Height of the arm can be adjusted. Pull a pin and the unit folds up for storage behind the pickup seat or inside a toolbox.

“It’s versatile, adjustable, collapsible, and takes up little room,” says Locklear.

“It can be used to support pipe vises, chain vises, straight-jawed vises, wire spools, bicycle racks, chop saw stands, power miter saws, camera stands. It can even be bolted to the top of a tailgate. One customer even used it to mount a fish cleaner.”

Sells for $125. Contact: FARM SHOW Followup, Joe Locklear, Locklear Electric, Inc., 191 N. Old St. Louis Road, Wood River, Ill. 62095 (ph 618 254-3813).

From the archive · Full text
Feature story

Winch Lets Him Handle Engines, Cast Iron Flywheels, Other Heavy Parts

Featured source:

After Ray Hosselton installed a new milling machine in his shop, he discovered he needed a way to lift heavy parts up into position for repair.

So the Louisville, Ill., farmer built a boom that swivels 180 degrees - from outside the shop door back directly to the milling machine. He equipped it with a winch - powered by an electric drill - for heavy lifting.

“It’s ideal for pulling engines, lifting cast iron flywheels and handling other heavy metal parts,” he says.

He built the 12-ft. long boom out of two lengths of 4-in. channel iron welded together back-to-back. The boom, which is 10 ft. high, pivots on a frame made out of 6-in. angle iron that mounts on the door of the shop.

A 2,000-lb. commercial chain winch mounts on a roller bracket Hosselton built to fit the boom. He hooked a 3/8-in. variable speed Makita electric drill to the winch. He took the trigger out of the handle and mounted it on a block of wood that’s connected by wires to the drill. The trigger hangs at about waist height for easy control of the winch.

The drill drives the winch very slowly for safe, heavy lifting, he notes.

“It works perfectly,” Hosselton says.

“I couldn’t be more pleased.”

Out-of-pocket expense was less than $200, including $60 for the drill and $40 for the winch.

Contact: FARM SHOW Followup, Ray Hosselton, Ray and Frankie’s Machine Shop, R.R. 1, Box 77A, Louisville, Ill. 62858 (ph 618 665-4114).

From the archive · Full text
Feature story

He Built His Own Bi-Fold Doors

Featured source:

When Nebraska farmer Steve Hietbrink tore down a pair of 40 by 90-ft. chicken houses, he saved the aluminum roofing and all salvagable wood to build a 60-ft. wide, 104-ft. long machine shed and shop. In the process, he designed and built a pair of 16-ft. high bifold doors that would have cost thousands if he had bought it new.

“They work as well as any doors on the market. A lot of people come by to look at them,” says Hietbrink.

“I saved about $5,000 by putting up the shed myself, and I saved about $5,000 on each door.”

Half the shed is used as a shop and has a cement floor. The other half is used to store machinery and has a dirt floor. Hietbrink uses a roll-down curtain to separate the two areas. He used aluminum roofing left over from the chicken houses to build the shed’s side walls. The roof was built from new material. He also bought new 60-ft. wide clear span roof trusses.

A 30-ft. wide bifold door is built into one end of the shed, and a 24-ft. wide door is on one side. He used 2-in. sq. steel tubing to build frames for the doors.

Hietbrink opens and closes the doors with a two-way switch. An electric motor is used to power a worm drive gearbox, which winches in cables wrapped around a pipe along the bottom of each door. An electric contact system is used to reverse the motor, resulting in “power up, power down” that eliminates the need for a brake system to keep the door from “creeping” down after it’s opened. Rollers salvaged from railroad cargo cars ride up and down angle iron tracks at the outside edges of the door.

Contact: FARM SHOW Followup, Steve Hietbrink, Box 88L, Firth, Neb. 68358 (ph 402 791-5777).

From the archive · Full text
Feature story

New Torch Tip Heats Fast

Featured source:

You can sweat pipe joint in seconds with new double and triple flame torch tips that concentrate the flame directly on the pipe with no damage to the surrounding area.

Twin Flame Tips work on two sides of pipe from 5/8 up to 2 1/8 in. dia. Triple Flame Tips heat the entire circumference of a pipe where only one side is easily accessible.

The tips were developed for Smith Equipment’s new Quickfire Torch, but adapters are available to make them suitable for use with any industrial oxy fuel torch.

Prices range from $20 to $45. The company offers several other multi-flame torch tips, including up to an 8-flame tip.

Contact: FARM SHOW Followup, Smith Equipment, 2601 Lockheed Ave., Watertown S.Dak. 57201 (ph 800 328-3363 or 605 882-3200; fax 2100).

From the archive · Full text
Feature story

Handy Portable Light Cost Just $30

Featured source:

For about $30 you can build a 6-ft. high portable service light that can be used anywhere because it operates off the battery of any vehicle, says inventor Kirk Harrold.

A pair of lamps mount on top of the stand and can be rotated in any direction. The lamps mount on a detachable bracket that you can lift off, if needed, to get a closer look at something.

The stand was made with a 6-ft. length of 1/2-in. dia. water pipe that’s threaded on both ends with a T-joint at the bottom.

To make the lamp mounting bracket you weld a 10-in. long, 1-in. wide flat iron - with a hole drilled into each end - to a pipe joining collar that screws into the top of the stand. A 1 1/2-in. wide piece of angle iron with a hole drilled into it is then welded onto the center of the flat iron. Then the bracket-supporting collar is screwed onto the stand. Harrold mounted a toggle switch in the angle iron and connected both leads from the lamps to one of the switch terminals. He attached a fuse to the cord’s power lead (black) and then to the remaining terminal on the toggle switch.

Attach alligator clips to the free end of the cord and wind the cord onto the cord bracket. The clips can be attached to the battery terminals of any 12-volt vehicle.