Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Issues / Vol. 22, No. 5 (1998)

Vol. 22, No. 5 (1998)

Money-Saving Repairs & Maintenance Shortcuts · Printed section pp. 38–39

30 selected entries · Complete text of selected entries

This issue’s section includes reader tips and feature-length shop stories. Held items and editorial notices are not reproduced.

Archive text: prices, coupons, availability and contact details reflect the original publication, not current offers. Reader methods are not universal instructions; follow manufacturer guidance and proper safety practices.

Reader shop tips

From the archive · Full text
Reader shop tip

Ervin Clark

Ervin Clark, Oroville, Calif.

Ervin says the best idea he ever had was installing air hose hookups at various locations throughout his 20 by 40-ft. shop. They let him plug in a short air hose wherever he needs air.

“I installed 10 1/4-in. dia. hookups, including two on each workbench, one near each of two doors, and two at the back of the shop. Live all the time, they run off a centrally located, 150-gal. capacity air compressor connected to an extra 25-gal. storage tank, for a total capacity of 175 gals. The hookups are plumbed to the air compressor with Schedule #80 black PVC pipe. The system provides up to 125 psi. Total cost to set up was less than $100, including $3 apiece for the hookups and $25 for the extra air tank, which I bought at an auction.”

From the archive · Full text
Reader shop tip

Donald Risser

Donald Risser, Bainbridge, Pa.

Donald came up with a simple way to properly inflate tires on his implements - without having to dig out the manual every time.

“I used my computer to print out a 4 by 8-in. card containing proper inflation levels for all my equipment. I had it laminated at an office supply store, then hung it right inside the door of my shop above my air compressor. I’ve got proper inflation levels for tires on 18 to 20 implements, including hay wagons, hay rakes, tractors and a skid steer loader. Lets me know at a glance what correct levels should be. Eliminates the risk of overinflating or underinflating a tire or tires.”

From the archive · Full text
Reader shop tip

Alexander Thomson

Alexander Thomson, Woodbury, Conn.

“I put up four chain hoists on existing I-beams in my shop to lift heavy objects. My 30 by 30-ft. cement block shop was formerly a welding shop and already had the two 12-in. I-beams, which run at right angles bisecting the shop. I found four 1-ton chain hoists and trolleys at various auctions and put two hoists on each rail. They’re an ideal, safe way to split tractors, move machinery, and position heavy items for welding. They’re the best time savers money can buy and I got all four for less than $200. Great for a one-man operation like mine.”

From the archive · Full text
Reader shop tip

A. David Karge

A. David Karge, Tallmadge, Ohio

“Many drill bits bigger than 1/2-in. dia. have a tendency to slip in the drill chuck. If you grind three flat sides onto the shank, you can solve the problem. You can space these equidistant around the shank by wrapping electrical tape around the bit, leaving the shank exposed, and snugly screwing a close fitting hex nut onto the taped end. By resting every other flat side of the nut on the tool rest of the bench grinder, you can easily grind three equally spaced, 1/16-in. deep flats on the shank. Simply remove the hex nut and tape and you’re ready to use the drill without having the drill bit slip.”

From the archive · Full text
Reader shop tip 1 of 2

John Sparrow

Individual tip 1 of 2 from this reader’s published contribution.
John Sparrow, Barrie, Ontario

John made a tool for repairing and cleaning threads on bolts in small, hard-to-get-at places such as manifolds. It consists of a 3-in. length of 1 in. dia. pipe with a 3/4-in. hex nut or shaft welded to one end and a small thread die fitted into the other. A 1/4-in. dia. set screw holds the die in place in the pipe. To use, he simply turns the die on the bolt with a socket or straight wrench. Works great on any size bolt from 3/8 up to 1/2 in., he says.

From the archive · Full text
Reader shop tip 2 of 2

John Sparrow

Individual tip 2 of 2 from this reader’s published contribution.
John Sparrow, Barrie, Ontario

He also made a strap-style oil filter wrench out of a 24 in. length of 2 in. wide car seat belt webbing. A homemade 4 in. long shaft with 1/2 in. cut out of one side serves as a pin to join the two ends of the strap. It was sewn into the strap by a shoemaker. To use, he simply tightens the strap loop around the filter with a wrench, and keeps tightening until the filter works loose. Works great and never stretches out the way some commercial strap-type wrenches do.

From the archive · Full text
Reader shop tip

Luther Lerfald

Luther Lerfald, Hatton, N. Dak.

“We specialize in a wide variety of exhaust or fume extraction systems which are ideal for farm shops.

“One of our most popular products is a portable extraction unit that captures and filters welding fumes and dust. The exhaust hose pivots on a swing arm that rotates 360 degrees. It can also hook up to car, truck or tractor exhausts. Prices start at $1,950.

“We’ve got other exhaust extraction systems that either mount overhead or under-ground. They come with hoses of various lengths and diameters. Prices start at $999.

Contact: FARM SHOW Followup, Air Clean Products, R.R. 1 Box 93, Hatton, N. Dak. 58240 (ph 701 543-3609; fax 3701).

From the archive · Full text
Reader shop tip

Ron Watt

Ron Watt, Westlock, Alberta

Ron’s company, Hi-Tech Distributors, manufactures and sells a Swedish-designed injector flush system for diesel engines that uses a slightly different approach than other such systems on the market.

“Our Superinjector system uses 100 percent cleaning fluid in the flush rather than a mixture of cleaning fluid and diesel fuel,” Ron says.

“After all, diesel fuel contributes to injector problems in the first place.”

The 12-volt D.C. system hooks up to the vehicle’s battery and includes a 60 minute timer, separate pump switch, pressure output control (15 psi max), high pressure hoses with quick couplers and fittings, easy-change 5 micron fuel filter, and pressure regulator from 1 to 15 psi. It weighs approximately 22 lbs.

You bypass the fuel filters and disconnect the engine’s fuel supply, connecting Hi-Tech’s system to the engine. It sends its specially formulated cleaning fluid through the diesel pump, fuel rail and injectors. The solution removes wax, varnish and other contaminants as the engine operates for 20 to 30 minutes. Sells for $2,900 (Canadian). A new model for both gas and diesel engines is also available for $2,900.

Contact: FARM SHOW Followup, Hi-Tech Distributors, 10624-110th Street, Westlock, Alberta, Canada T7P 1A2 (ph 403 349-4290; fax 3676; website www.agrimark com/users/S-inject/).

From the archive · Full text
Reader shop tip

Elaine Boothby

Elaine Boothby, Brooksville, Fla.

Elaine’s company, Equipment Supply Company (ESCO), has just introduced a new wheel rim straightening tool that’s ideal for farm equipment.

The “Round Again” wheel rim straightener is designed for heavy duty truck wheel rims, 17 though 24.5 in. It consists of two half round forms powered by a 10-ton ram. When pressure is applied to the hydraulic pump via a foot pump, the ram exerts pressure on the damaged area and returns it to its original shape.

Ideal for rims damaged by railroad tracks, potholes, and other off-road hazards.

Model 60650 sells for $599. Smaller model 60600 (pictured) sells for $425. Contact: FARM SHOW Followup, Equipment Supply Company, 15424 Flight Path Drive, Brooksville, Fla. 34609 (ph 800 352-9852 or 352 754-1117; fax 4508).

From the archive · Full text
Reader shop tip

Murray Huff

Murray Huff, Edmonton, Alberta

“You can use polyester resin-type auto body filler, such as Bondo, to fix worn shafts and pulleys to ensure a virtually permanent tight fit. It works best on low-speed applications, such as the worn reel pulley on my MacDon pickup reel, which I fixed two years ago. Once it’s applied to the shaft or pulley, you must reassemble the machine fairly quickly as the filler hardens in 5 to 10 minutes. The next time you disassemble the machine, it takes just a bit of heat with a torch to disassemble.

“One caution: auto body filler absorbs a lot of moisture, so if your equipment isn’t shedded, it could rust badly in the joint.

“You can buy a whole gallon of the stuff for between $15 and $30.”

From the archive · Full text
Reader shop tip

Bill Reeks

Bill Reeks, Cromwell, Ky

This shut-off switch for stopping my table saw was quick and easy to make. It lets me shut off the saw without taking my hands off materials I’m holding. It consists of a 3 by 10-in. board, 1/ 2-in. thick. It’s fitted with a pine “finger” that’s aimed at the stop button. The bottom end of it is hinged to the side of the saw with a piece of sheet aluminum screwed to both the board and the saw. I just hit the board with my knee to shut it off.”

From the archive · Full text
Reader shop tip

Jim Jorgenson

Jim Jorgenson, Broadview, Mont.

“One of the handiest maintenance ideas we ever had was putting a flatbed on our pickup and equipping it for making repairs in the field. We fitted it with a a welder, 300-gal. fuel tank, torch, vice, dual batteries, air compressor and toolbox. It saves a lot of down time.”

From the archive · Full text
Reader shop tip 1 of 3

Robert Hellebuyck

Individual tip 1 of 3 from this reader’s published contribution.
Robert Hellebuyck, Avoca, Mich.

“I make balers work better by painting all bale chambers and chutes with graphite slip plate paint. It works great to prevent rust and stops sticking.

From the archive · Full text
Reader shop tip 2 of 3

Robert Hellebuyck

Individual tip 2 of 3 from this reader’s published contribution.
Robert Hellebuyck, Avoca, Mich.

“Another idea that works well is using an air chisel for cutting off rusted bolts when replacing broken hay rake tines. Eliminates wasted time.

From the archive · Full text
Reader shop tip 3 of 3

Robert Hellebuyck

Individual tip 3 of 3 from this reader’s published contribution.
Robert Hellebuyck, Avoca, Mich.

“One handy idea in our shop was installing an air reel with 100 ft. of air hose. Makes it easy to reach equipment anywhere in the shop with impact wrenches or to fill tires or blow dust off equipment.”

From the archive · Full text
Reader shop tip

Don Kirby

Don Kirby, Lamont, Okla.

“When I poured my shop floor, I installed two shop-built steel boxes out of angle iron and flat metal in the floor to hold our sickle repair machine. It allows the sickle to lay flat on the floor when replacing sections and installing rivets. It makes repairs much easier than when we had to put the sickle up on blocks to line it up level with the sickle machine.”

From the archive · Full text
Reader shop tip

Chris Hendricks

Chris Hendricks, Franklin, Ind.

“Gauge wheels on Deere and Kinze planters frequently work loose on the bearing spacers. I solve the problem by disassembling the wheel and pounding on the bearing opening with a large hammer. Then I put JB Weld around the bearing spacer and reassemble the wheel. Holds tight and is a long-term fix.”

From the archive · Full text
Reader shop tip

Raymond Pixley

Raymond Pixley, Mt. Carmel, Ill.

“I recycled six old lawn chairs to make nifty overhead lumber storage. The idea eliminated the need to buy commercial hangars.

“What we did was to remove the rivets from the chairs, discarding the back and arm rests and saving the legs. Then we used dry wall screws to secure the U-shaped legs to the floor joists. You need to make sure they’re level or the wood will warp.

“This let us get the lumber up off the floor but it’s still easy to get at it. I liked finding a way to use the old chairs rather than just throwing them away.”

From the archive · Full text
Reader shop tip 1 of 2

Larry Stephen

Individual tip 1 of 2 from this reader’s published contribution.
Larry Stephen, Martinsville, Ill.

“When drilling overhead, a good way to catch the dust and filings is to punch through a paint filter screen to use as a catcher. Works good and keeps things neat.

From the archive · Full text
Reader shop tip 2 of 2

Larry Stephen

Individual tip 2 of 2 from this reader’s published contribution.
Larry Stephen, Martinsville, Ill.

“To get extra down pressure when using a hand drill, I put a chain hook on the end of a 16-in. length of pipe. Then I put another hook on the end of a short length of chain. To apply down pressure to the drill, I hook the chain to the underside of the workbench and then fasten the hook on the pipe to the chain. I press down on the pipe against the back of the drill. Takes all the work out of drilling and is accurate, too.”

From the archive · Full text
Reader shop tip

Andrew Cameron

Andrew Cameron, Sedgewick, Alberta

“I designed a pair of safety arms for my Vermeer 605C round baler. The problem is when hay wraps around the rollers and belts the only way to unplug it is to stand inside the baler with the back open. If a hydraulic hose breaks or someone touches the controls, the back can slam down on the person unplugging the machine.

“I simply made a fold-up steel brace for each side of the baler out of 5/8-in. dia. steel rod. The braces fit into slots welded to each side of the back gate. Works great.”

From the archive · Full text
Reader shop tip

Keith P. Mayer

Keith P. Mayer, Naper, Neb.

“I own two GM 6.2-liter diesel-powered pickups that are reliable and burn considerably less fuel than pickups with comparable gas engines. However, GM’s starting aid system is a major problem. It relies on a ‘glow plug’ system that heats a small chamber in each cylinder for cold starts.

“The problem with this system is that the glow plugs eventually burn out one by one. Or, the controller or relay may malfunction and cause the entire system to burn out, which requires a costly replacement. After a plug burns out it often swells on the end and is difficult to remove from the head. If the tip breaks off you may have to remove the head in order to retrieve it.

“I got tired of repairing the system so instead I began to spray ether into the air intakes while someone else cranked the engine. It worked but was always a hassle. I decided to come up with a way to inject ether into the engine from the cab.

“My idea requires a 25-in. length of 1/8-in. dia. copper tubing. A hole is drilled through the firewall about 2 in. to the left of the throttle cable hole. I reamed out the end of the tubing in the cab with a 5/64-in. drill bit so that a 5-in. long plastic tube would fit tightly into the end of it. To ensure no leakage I put some superglue on the tube. I positioned the plastic tube next to an 8-oz. can of ether on the floor in front of the 4-wheel drive selector lever. The tip on the ether spray can was then hooked up to the plastic tube. To prevent tube separation and leakage, I put a small amount of superglue on the end where the spray tip and tube meet.

“The other end of the copper tubing protrudes up into the air cleaner housing inside the air filter. A 1/8-in. dia. hole can be drilled into the bottom housing, or on the medium duty engines a vacuum line can be disconnected and tube can be installed directly into the housing through the disconnected hose.

“For best results, press the spray cap for 1 to 1 1/2 seconds before cranking whenever the temperature is below 32 degrees. When the temperature is above 45 degrees, a half second or a quick press and release of the spray cap is usually enough.

“When used properly this starting aid will provide faster starts, less wear on the starter, less battery drain, and longer battery and alternator life compared to glow plugs, with no need for expensive glow plug system up-keep. Under no circumstances should one use both ether and glow plugs at the same time so if you decide to convert you must disconnect any working plugs or disconnect the entire system. This same principle could probably be made to work on Ford 6.9 and 7.3-liter diesel engines with indirect injection but I’m not familiar with them.”

From the archive · Full text
Reader shop tip

Alan MacLean

Alan MacLean, Kingston, Ontario

“Large holes can be bored on a lathe without having to use a time-consuming free plate mounting. A 1 1/2-in. long piece of pipe, faced square, and with an inside diameter slightly larger than the outside diameter of the desired hole, is accurately positioned on the plate. Attach to the plate with three 1/2-in. long welds positioned 120 degrees apart. Chuck the pipe into the 3-jaw universal chuck and bore the hole. Carefully remove the tach welds with a disc grinder.”

From the archive · Full text
Reader shop tip

James McGowan

James McGowan, Russell Springs, Ky.

When the radiator on his 1950’s International Cub tractor froze, James took it to a local radiator shop where he was told the only fix was a new radiator.

“But I had some extra time and couldn’t justify the expense of a new radiator,” he says.

“So I got some J.B. Weld from our local K-Mart, mixed it up, and applied it liberally to both sides of the radiator where the cores were pushed out. I let it cure and dry for about a week, then filled the bottom two cores with silicone caulk, which I also allowed to cure and dry for a week. I pressure-tested the radiator and it seemed fine. In fact, it held water and anti-freeze without leaking until I traded the tractor off a year or two later. As far as I know, it still does.

“Cost was $4 or $5 for J.B. Weld and $3 for the tube of silicone caulk.”

From the archive · Full text
Reader shop tip

Boyt Young

Boyt Young, Dallas, S. Dak.

Boyt uses a grease gun tip equipped with a long needle to grease wheel bearings to get more grease in and around bearings.

“The needle tips are available from most implement shops or auto parts stores. Needles come in various diameters, similar to hypo-dermic vaccinating needles. They let you fill the bearing completely with grease and are a lot faster than packing bearings by hand. They can also be used on greaseless bearings. You simply stick the needle through the seal to inject grease.”

From the archive · Full text
Reader shop tip 1 of 2

Rodney Remley

Individual tip 1 of 2 from this reader’s published contribution.
Rodney Remley, Eaton, Ohio

“I had trouble with the fuel tank on my 1981 Ford F-250 rusting from condensation and then plugging the fuel filter. I’m sure it’s a problem on any pickup with a steel fuel tank. To solve the problem, I installed a 3/4-in. dia. spin-on fuel filter in the fuel line. It’s the type used on portable fuel tanks. I’ve had no trouble since. The spin-on filters are available for about $15 at any tractor supply or farm supply store.

From the archive · Full text
Reader shop tip 2 of 2

Rodney Remley

Individual tip 2 of 2 from this reader’s published contribution.
Rodney Remley, Eaton, Ohio

“Also, I’m planning on building a 40 by 60-ft. shop and intend to dig a pit for a bay to grease and change oil in my vehicles and machinery (see diagram). A friend of mine did this when he put up his shop recently and it’s a much more convenient way of servicing equipment than installing a lift. Depending on size of shop and length of vehicles, you can dig a pit and use concrete block for walls for as little as $3,000. So it’s also more economical than most lifts.”

From the archive · Full text
Reader shop tip

Derril Lance

Derril Lance, Wichita Falls, Texas

“At Taylor Foundry Company, we’ve been specializing in making tractor weights since 1960, but perhaps there are some farmers who aren’t familiar with us.

“We make a full line of tractor weights - from suitcase weights to rear wheel weights - for every make of tractor. For example, we make 42-lb. suitcase weights for small utility or garden tractors and up to 1,700-lb. rear wheel weights for large tractors.”

Contact: FARM SHOW Followup, Taylor Foundry Company, P.O. Box 244, Wichita Falls, Texas 76307 (ph toll free outside Texas 800 272-3456, in Texas 800 942-4482, or 940 767-8541; fax 3940).

Shop feature stories

From the archive · Full text
Feature story

Garage Door Makes Great Shop Partition

Featured source:

When George “Bing” Ribble put up an insulated 40 by 40-ft. addition to his shop a few years ago, he wanted a low-cost way to partition it off so he could heat the smaller area. He decided to use a garage door.

The Hettick, Ill., farmer found some damaged aluminum roll-up garage door panels to seal off the 11-ft. tall by 12-ft. high opening.

Ribble built a bottom door frame out of strap iron, a top frame out of a 2 by 6 for the door to hang from, and side frames out of 2 by 4’s nailed flush to the walls. He fitted top and bottom frames with steel track and rollers for the door to slide in.

Using the sliding door, Ribble can quickly partition off the working area in his shop, keeping him comfortable and saving money on heat.

“It works excellent,” he says.

“It slides easy and does the job it’s supposed to.”

Biggest expense, about $50, was for new steel door track.

Contact: FARM SHOW Followup, George “Bing” Ribble, R.R. 2, Hettick, Ill. 62649 (ph 618 778-5752).

From the archive · Full text
Feature story

Go-Anywhere Hand Cleaning Towels

Featured source:

You can throw a bucket of these new hand-cleaning towels in your pickup or tractor to use anywhere. They’ll quickly remove dirt, oil, tar, caulk, grease, paint, adhesives, sealants and more.

“Scrubs In A Bucket” contain a natural citrus hand cleaner coupled with volcanic pumice. They also contain emollients for conditioning and softening hands and Triclosan, an antibacterial.

Scrubs In-A-Bucket contain 72 10 by 12-in. towels and sell for $12 each plus $4 S&H.

C o n t a c t : FARM SHOW F o l l o w u p , R i c h a r d s o n Safety Equipment Inc., P.O. Box 7682, High Point, N.C. 27264 (ph 336 886-8533; fax 5179).