From the archive · Full text
Feature story
Featured source:
Rust forms because iron atoms give off electrons. This process allows it to combine with hydrogen and oxygen to form new compounds, one of which is iron oxide, better known as rust. If you can somehow replace the…
Read the complete story →From the archive · Full text
Feature story
Featured source:
After our story in the last issue on West Coast Inventor Supply, a company that specializes in miniature parts for inventors and engineers (ph 949 858-7251), we heard from Bob Stevens at Small Parts Inc., a company based…
Read the complete story →From the archive · Full text
Reader shop tip
Andrew Abrams, P.O. Box 182, Marcellus, Mich. 49067 (ph 616 646-0202; Website
www.marcellus-metalcasters.com): “It’s becoming nearly impossible for an individual to get castings made economically at most metal working shops. Our market niche is reproduction castings and prototypes. We produce gray, nodular, and abrasion resistant iron castings and low alloy…
Read the complete tip →From the archive · Full text
Reader shop tip
Betty L. Jones, Claremore, Okla.
“Here’s an idea that saves me a lot of time when painting. I punch holes inside the rim around the top of the can so that when I take the brush out, paint drips back inside the can.…
Read the complete tip →From the archive · Full text
Reader shop tip
Byrl Cogburn, De Leon, Texas
“My Deere 435 round baler has dual twine tie arms which allow it to wrap two lines of twine at the same time. It uses a pair of twine ‘brakes’ which hold tension on the baler twine as…
Read the complete tip →From the archive · Full text
Reader shop tip
Clarence Hilmer, Columbus, Neb.
“I’ve repowered machines and worked on engines for more than 50 years. Recently, I had a terrible time removing a distributor from a 1979 302 Ford engine. Having tried every penetrating oil I could find, I finally tried…
Read the complete tip →From the archive · Full text
Reader shop tip 1 of 2
Individual tip 1 of 2 from this reader’s published contribution.
Dave White, Farmersville, Ill.
Attending a nearby industrial auction paid off recently for Dave, who found two good buys for his farm shop. The first purchase was a 15-ft. tall rolling ladder that mounts on casters. Makes it easy for him to…
Read the complete tip →From the archive · Full text
Reader shop tip 2 of 2
Individual tip 2 of 2 from this reader’s published contribution.
Dave White, Farmersville, Ill.
He also picked up a set of 12-ft. tall heavy-built industrial shelving. He says it’s strong enough to hold just about anything. He reaches the top shelves from his rollling ladder.
Read the complete tip →From the archive · Full text
Reader shop tip
Fred Hansen, Santa Rosa, Calif.
“In the “Best & Worst Buy” section of Vol. 26, No. 3, a reader wrote about his Deere 5210 tractor. The air conditioning didn’t work well on it. We solved that same problem on our 5500 by plumbing…
Read the complete tip →From the archive · Full text
Reader shop tip
Jack & Dave Wock, Jerseyville, Ill.
Jack and Dave built this 18-ft. long hoist out of a piece of 8-in. I-beam. What makes it unique is that it pivots 180° on an anchor post at the middle of the wall on one side of…
Read the complete tip →From the archive · Full text
Reader shop tip
James Spencer, Memphis, Ind.
“After using my Vermeer 605C round baler for several years, the rubber wore off the coated roller. Instead of spending a lot of money for a new roller, I put some beads of weld on the roller like…
Read the complete tip →
Photo: FARM SHOWFrom the archive · Full text
Reader shop tip
Jeff Lang, Newport News, Va.
“I wanted a soap dispenser for my shop but couldn’t find one I liked that was easy to fill. My wife was throwing away a pump soap bottle so I mounted it between a couple pieces of wood…
Read the complete tip →From the archive · Full text
Reader shop tip
Lewis Leon Dick, Mt. Hope, Kan.
“I’ve always had a problem with straw going around the end of cylinder bars on our combine cylinder. The result is a hole worn in the metal on the side of the combine.
Read the complete tip →From the archive · Full text
Reader shop tip
Rick Kuhn, Oconee, Ill.
Rick made an insulated shop at one end of his 60 by 140-ft. equipment shed by designing a folding door system that closes off the shop when needed.
Read the complete tip →From the archive · Full text
Reader shop tip 1 of 2
Individual tip 1 of 2 from this reader’s published contribution.
W. Jacobson, Midale, Sask.
“I’ve come up with a simple way to patch tires. Clean around the hole with gas or other cleaner. Then push clear silicone into the hole and around it. Only the clear kind of silicone works. After an…
Read the complete tip →From the archive · Full text
Reader shop tip 2 of 2
Individual tip 2 of 2 from this reader’s published contribution.
W. Jacobson, Midale, Sask.
“Here’s another one: A hack saw will cut twice as easy and last twice as long when speared with lard. It cuts just as well but with a lot less effort.”
Read the complete tip →From the archive · Full text
Reader shop tip
Jake Braun, Hague, Sask.
“My shop is about 100 ft. long, with most of the tools stationed at one end. That results in a lot of running back and forth. To solve the problem, I made a two-wheeled wooden caddy that lets…
Read the complete tip →From the archive · Full text
Reader shop tip
Larry Moore, Loudon, N.H.
“I put a basketball hoop up in one end of our shop. It was the best thing I could have done to keep the floor clean, because my kids are always sweeping the floor in order to play.…
Read the complete tip →From the archive · Full text
Reader shop tip
Les Turner, St. Ansgar, Iowa
“My 1978 Toro Ground Master 52-in. riding lawn mower had a worn steering gear. Replacing it with a new steering gearbox would have cost hundreds of dollars, so to save money I used the manual steering sector off…
Read the complete tip →From the archive · Full text
Reader shop tip
Michael Mortell, Franklin Grove, Ill.
“A lot of equipment today has small wheels on narrow hubs with bearings and thin metal or plastic caps over the hub.
Read the complete tip →From the archive · Full text
Reader shop tip
R. Kevon Stockwell, Jeffersonville, Ohio
“We had a 1989 Deere 750 no-till drill that had a pin with double roll pins holding a pressure spring in place. We found the easiest way to remove the roll pins was to heat the shaft red…
Read the complete tip →From the archive · Full text
Reader shop tip
Ray Albertson, South Mills, N.C.
After building his farm shop, Ray discovered that the 20-ft. wide sliding door was too heavy for one person to push open alone.
Read the complete tip →From the archive · Full text
Reader shop tip
Stephen Carpenter, Somerset, Ohio
“When the electric motor on my grain bin unloader wore out, I replaced it with an old hydraulic motor off a junked-out combine grain head. It actually improved things because it slowed the auger down which allows me…
Read the complete tip →From the archive · Full text
Feature story
Featured source:
“When a wind storm blew a pair of big sliding doors off the track on my barn, I decided to do something about it. I made a metal bracket and bolted it to a wood plank, which I…
Read the complete story →From the archive · Full text
Feature story
Featured source:
It took a lot of time but Bob Sampson says his harrow tine repair project was well worth it.
Read the complete story →From the archive · Full text
Feature story
Featured source:
Commercial “handyman” jacks have a small base that can push down into the ground, making the jack unsafe to use. Clifford Brandenburger, Beecher City, Ill. solved the problem by bolting the 4 by 6-in. base on his jack…
Read the complete story →
Photo: FARM SHOWFrom the archive · Full text
Feature story
Featured source:
If you have a Farmall Cub in need of restoration, you might want to get in touch with Alan Wells and Jack Borden.
Read the complete story →From the archive · Full text
Feature story
Featured source:
“These chrome liners will last three to four times longer than any other liner on the market,” says Craig Talbot, R & H Machine, Inc., Caldwell, Idaho. The company specializes in chrome alloy wear parts for tillage tools…
Read the complete story →From the archive · Full text
Feature story
Featured source:
Routine engine maintenance, like checking fluids or replacing spark plugs, can be difficult on pickups, trucks, vans or recreational vehicles. Otis Huff, Little River, Texas, found a way to make those jobs easier.
Read the complete story →From the archive · Full text
Feature story
Featured source:
Ever started a project and found yourself looking for a small motor, sprocket, gear or other part? If so, you’ll want to check out West Coast Inventory Supply.
Read the complete story →From the archive · Full text
Feature story
Featured source:
“It gives me a much better view of what I’m doing because there’s no base plate in the way,” says Clifford Brandenburger, Beecher City, Ill., who built a small hydraulic press equipped with a 1 1/2-ton hydraulic jack…
Read the complete story →From the archive · Full text
Feature story
Featured source:
If you own a set of Vise Grip-type “locking pliers”, you’ll be interested in this new screw-in handle that makes it easier to tighten down the jaws.
Read the complete story →From the archive · Full text
Reader shop tip 1 of 2
Individual tip 1 of 2 from this reader’s published contribution.
Bob Timan
“Old refrigerators are great for tool cabinets. I use one to store welding rods. You can put a lightbulb inside to keep out the moisture. We’ve never had a problem. We also use one for shop manuals and…
Read the complete tip →From the archive · Full text
Reader shop tip 2 of 2
Individual tip 2 of 2 from this reader’s published contribution.
Bob Timan
It’s also handy for battery spills.
Read the complete tip →From the archive · Full text
Reader shop tip
Daniel M. Swanson, Cambridge, Ill.
“With ever-increasing demand in the tractor for 12-volt power - grain drill monitor, grinder scale, sprayer monitor, etc. - I came up with a simple idea that makes hookups a lot easier. I simply connected a common 110-volt…
Read the complete tip →From the archive · Full text
Reader shop tip
Ethelbert Heck, Double E Farms Ltd., Box 47, Liebenthal, Sask. S0NB 1L0 Canada (ph 306 628-4250)
“All GM Duramax diesel truck owners know it’s a good truck. But GM engineers forgot that these trucks get driven on gravel roads, through brush, and under other tough conditions. Off-road driving can take out the fuel cooler…
Read the complete tip →From the archive · Full text
Reader shop tip
Gary Bannister, Boenne, Texas
“I have a simple method for stopping leaks in small metal tubing like power steering lines. I just use rubber gas hose with small clamps on either side of the leak. Works good and much cheaper and easier…
Read the complete tip →From the archive · Full text
Reader shop tip
John Rember, 1712 Upper Concession, Ormstown, Quebec
“We had a problem with the parallel linkage on the gang on our Case IH 183 row crop cultivator. The Case IH system consists of only one set of parallel arms per gang. The cultivator was bought used…
Read the complete tip →From the archive · Full text
Reader shop tip 1 of 2
Individual tip 1 of 2 from this reader’s published contribution.
Pete Peters, Osler, Sask.
“I’ve found that the empty spools from rolls of wire make good hose hangars on the wall of my shop. Just nail or screw them to the wall. Works great for hoses, extension cords, and rope.
Read the complete tip →From the archive · Full text
Reader shop tip 2 of 2
Individual tip 2 of 2 from this reader’s published contribution.
Pete Peters, Osler, Sask.
“I made this chimney scraper for cleaning out creosote buildup that a chimney brush will not take out. It consists of a small square box – open on the bottom – with sharpened edges. Mounts on the end…
Read the complete tip →From the archive · Full text
Reader shop tip
Robert E. Jensen, Edmore, Mich.
“Here’s how I remove frozen nuts or bearings. Use a torch to make two cuts 180° apart. Use oxygen in slow, short bursts. Stop just before getting to the shaft and then hit with a hammer and it’ll…
Read the complete tip →From the archive · Full text
Reader shop tip
Roger Kuntz, K-Tech, 5251 County Rd. X, Grainfield, Kan. 67737 (ph 785-673- 5560)
“K-Tech has been specializing in Blade Plow Leveling and tillage performance for over 20 years. A new breakthrough in engineering has allowed us to update the old blade plows with a new rockshaft bearing system. Rockshaft bearings are…
Read the complete tip →From the archive · Full text
Reader shop tip
T.E. Salsman, Richmond, Ky.
“My son-in-law operates Circle Seal & Gasket, a company that makes custom-sized O-rings for various industries. O-ring material is cut to precision length and the ends joined by a heat process. As the company has been in business…
Read the complete tip →
Photo: FARM SHOWFrom the archive · Full text
Feature story
Featured source:
“We’d like to tell your readers about our salvage yard, which has grown into one of the largest and best-organized sources of used parts in North America. It was started as a family business in 1988 and has…
Read the complete story →From the archive · Full text
Reader shop tip
Clarence R. Marshall, Warsaw, Ill. (ph 217 847-2197)
“Anyone restoring an older tractor maybe interested in my sideline business. I repair magnetoes, which after must be replaced when doing a restoration. I have new and rebuilt magnetoes available for either sale or trade.”
Read the complete tip →From the archive · Full text
Reader shop tip 1 of 2
Individual tip 1 of 2 from this reader’s published contribution.
Neal McCleary, Elkton, Md.
“I widened the pickup on my Deere 336 baler in order to make it easier to pick up wide windrows. I cut the pickup in half and welded four 6-in. spacers in to make room for another set…
Read the complete tip →From the archive · Full text
Reader shop tip 2 of 2
Individual tip 2 of 2 from this reader’s published contribution.
Neal McCleary, Elkton, Md.
“When the tongue on the same baler broke off, I replaced it with an extendable tongue off an old Fox chopper. I welded on a length of box beam to make the tongue the right length. The tongue…
Read the complete tip →From the archive · Full text
Reader shop tip
Ray Jensen, Dell Rapids, S. Dak.
“I obtained a low-cost skid steer loader by repowering an early 1970’s Bobcat 500 which I bought for $1,100. The original Kohler 22 hp, 2-cyl. gas engine was worn out, so I replaced it with another Kohler engine…
Read the complete tip →From the archive · Full text
Reader shop tip
Richard B. Allen, South Brookfield, Nova Scotia
“During the past three years I’ve had trouble seeing the string when making hay with my New Holland 630 round baler. I couldn’t tell if the string was moving or not, which caused me considerable grief. I was…
Read the complete tip →From the archive · Full text
Reader shop tip
Robinson Lawn & Garden, 110 SE 2nd St., Stigler, Okla. 74462 (ph 918 967-8662)
“I came up with a V-belt measuring device that lets me know what length V-belt I need whenever an existing belt breaks or wears out and I don’t know how long it was. Using contact cement, I glued…
Read the complete tip →
Photo: FARM SHOWFrom the archive · Full text
Reader shop tip
Steven S. Kling, Taylor, Wis.
“My son Samuel came up with a low-cost screw and nut holder as part of a 4-H project. He uses old tuna fish cans held in a homemade wooden frame with 20 compartments. He paints the cans different…
Read the complete tip →From the archive · Full text
Reader shop tip
Tom Bonner, Section, Alabama
He restores IH Cubs and Cub Cadets and has found that the tie-rod ends are usually worn out or bent so they can’t be reused.
Read the complete tip →From the archive · Full text
Feature story
Featured source:
A couple years ago FARM SHOW reported on an inexpensive new drill bit sharpener invented by Stan McDonald, Foxboro, Ontario (Vol. 24, No. 6). It was an attachment for benchtop grinders that sharpened any bit up to 1-in.…
Read the complete story →From the archive · Full text
Reader shop tip
Don McColl, Neidpath, Sask.
“I’m in the earth moving business and when the floor in my big earth-moving scraper got bent, I had to find a way to straighten the floor. I decided to make a giant press using big sections of…
Read the complete tip →From the archive · Full text
Reader shop tip
Matt Throener, Matt’s Ag Service, Carnegie, Okla.
Transmission and power take off repairs on tractors can be done faster and easier if the cab is removed, says Throener.
Read the complete tip →From the archive · Full text
Reader shop tip
Otto Wenz, Wenz Service, Inc., 1606 L Street, Tekamah, Neb. 68061-1289 ph 800 808-7885 or 402 374-2202)
“If your older IH tractor sometimes jumps out of gear or locks in gear, or if you’re just frustrated with the way it shifts, we can probably help. We had some of the same problems with our own…
Read the complete tip →From the archive · Full text
Reader shop tip 1 of 2
Individual tip 1 of 2 from this reader’s published contribution.
Samuel Wurz, Box 1060, Vulcan, Alberta, Canada T0L 2B0
“Fixing a flat truck tire can be a frustrating experience, because the sidewalls are so thick that you can’t hold them open with your hands. To solve the problem, I came up with a hook system. I set…
Read the complete tip →