Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW

Tools

5957 shop tips and stories · page 29 of 100, newest issues first.

From the archive · Full text
Reader shop tip

Charles Matthews

Charles Matthews, Petersburg, Tenn.

“When I use a piece of rubber or plastic hose to protect hydraulic lines, electrical wiring, air pressure lines or something else that requires abrasion protection, I cut the hose in a spiral pattern rather than straight down…

Read the complete tip →
From the archive · Full text
Reader shop tip

Dale Rogers

Dale Rogers, dalecmrogers@gmail. com

“In your last issue (Vol. 39, No. 6), Herman Vander Vos wrote about his problems with push rods in his Husqvarna riding mower bending and breaking. My guess is the sticky engine valves were caused by using stale…

Read the complete tip →
From the archive · Full text
Reader shop tip 1 of 4

Gary Holland

Individual tip 1 of 4 from this reader’s published contribution.
Gary Holland, (ladybug06@wildblue. net)

“Here are some ideas that have helped me: “Buy 1-in. foam pipe wrap and cut it to fit over your windshield wipers. It shields them from heat and cold so they don’t deteriorate. Just take the wraps off…

Read the complete tip →
From the archive · Full text
Reader shop tip 2 of 4

Gary Holland

Individual tip 2 of 4 from this reader’s published contribution.
Gary Holland, (ladybug06@wildblue. net)

“Save hydraulic lines on your tractors and other equipment by covering them with insulated pipe wrap. It keeps fluid from cold in winter and heat in summer and prevents rot from sunlight. Most lines can be covered with…

Read the complete tip →
From the archive · Full text
Reader shop tip 1 of 2

Jim Bowser

Individual tip 1 of 2 from this reader’s published contribution.
Jim Bowser, Saxton, Penn.

“I use anti-skid tape in short strips on both husking rolls on my cornhead to grip stalks better. These strips, which are normally used on stairs and walkways, can be purchased at any hardware store. Once the strips…

Read the complete tip →
From the archive · Full text
Reader shop tip 2 of 2

Jim Bowser

Individual tip 2 of 2 from this reader’s published contribution.
Jim Bowser, Saxton, Penn.

Another idea Jim has is to color code his tools by size. For example, he takes all his 7/16th-in. wrenches – open end, sockets, nut drivers, combination wrenches – and spray paints them blue. All 1/2–in. wrenches are…

Read the complete tip →
From the archive · Full text
Reader shop tip

Jim Stricker

Jim Stricker, Helena, Ohio

“I have a bunch of plastic fuel cans that originally came with flexible accordian-type spouts, which deteriorated after a few years. I replaced them with 3/4-in. dia. CPVC plastic pipe by cutting off the flex part of the…

Read the complete tip →
From the archive · Full text
Reader shop tip 1 of 2

David Prause

Individual tip 1 of 2 from this reader’s published contribution.
David Prause, China Spring, Texas

“Because of sprocket wear, the reel drive chains on my 1968 New Holland 469 and 479 9-ft. haybines kept jumping off. Replacing the sprocket and the chains got expensive, so I got a small, flat idler pulley with…

Read the complete tip →
From the archive · Full text
Reader shop tip 2 of 2

David Prause

Individual tip 2 of 2 from this reader’s published contribution.
David Prause, China Spring, Texas

“Used motor oil or 80-weight transmission oil works good to keep roller chains greased. In the field I use a paint brush to apply the grease every 2 or 3 hrs. as the chains are moving. It reduces…

Read the complete tip →
From the archive · Full text
Reader shop tip

Crescent Marketing

Crescent Marketing, Apex Tool Group, Sparks, Md.; ph 913 362-1670; www.crescenttool.com)

Crescent’s self-adjusting, 12-in. pipe wrench is designed for one-handed use and is lighter weight than standard pipe wrenches. It also has a slim profile so it can be used where other wrenches won’t fit, says the company. The…

Read the complete tip →
From the archive · Full text
Reader shop tip 2 of 3

Chris Born

Individual tip 2 of 3 from this reader’s published contribution.
Chris Born, Minneapolis, Minn.

Also, put a small piece of tape on the straw itself. That way if the straw shoots off the tip of the nozzle, the tape will shorten the straw’s flight and make the straw easier to find.

Read the complete tip →
From the archive · Full text
Reader shop tip 1 of 2

Jonathan Dean

Individual tip 1 of 2 from this reader’s published contribution.
Jonathan Dean, Baskin, La.

“I have had terrible trouble with starters on Deere 4020’s not holding up. However, I discovered that if you replace them with a gear reduction starter, or one from a larger Deere tractor, they’ll start easily.

Read the complete tip →
From the archive · Full text
Reader shop tip 2 of 2

Jonathan Dean

Individual tip 2 of 2 from this reader’s published contribution.
Jonathan Dean, Baskin, La.

“To keep hydraulic lines from rubbing against frame rails on equipment and wearing holes in them, take a piece of 1 or 2-in. flexible conduit and a hose clamp and mount it to the equipment. This will form…

Read the complete tip →