Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 26, No. 3 (2002)

Matt Throener

Matt Throener, Matt’s Ag Service, Carnegie, Okla.

Transmission and power take off repairs on tractors can be done faster and easier if the cab is removed, says Throener.

Many of the farm tractors that come into his shop for repairs are Deere, from the company’s 30 through 60 series.

“The cabs on these tractors all have lift pockets built into them, but they’re only 1/2 in. wide,” Throener says.

“You can’t pick them up with normal flat forks. You’re supposed to buy a special tool to lift the cabs off these tractors, but it costs $4,000 to $5,000.”

Throener decided to make forks to fit the pockets himself. He cut two 4-ft. lengths of 1/2 by 4-in. flat steel bar.

“I had to machine 1/2 in. off the top edges on the front in order to make them fit into the lift pockets, but on the back ends, I left the forks 4 inches wide.

This makes a stop on the forks, so the cab can’t slide back on them too far,” he says.

He welded his forks to quick-tach brackets he made from 3-in. sq. steel tubing and angle iron.

“To lift a cab off a tractor, I first put the forks into the pockets by hand. Then I move the loader into position under the forks and raise it up so the quick-tach brackets engage. Then I just lift up and back away,” he says.

“It takes about an hour to disconnect all the mountings and wiring from the cab.

“But having the cab out of the way can save eight or ten hours on a transmission or power take off repair because you’re not trying to crawl in under the tractor all the time,” he says.

“It’s safer this way, too. In the past we would split the transmission, block up the front end, and then roll the rear end back out of the way.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.