Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 26, No. 4 (2002)

Rick Kuhn

Rick Kuhn, Oconee, Ill.

Rick made an insulated shop at one end of his 60 by 140-ft. equipment shed by designing a folding door system that closes off the shop when needed.

It consists of 4-ft. wide door panels, 10 ft. high. They slide along an old hay carrier track that Rick salvaged from a hay barn. Each door has a rolling hanger attached to its top center. Once stretched out flat, they form an insulated wall.

To seal off the open rafter area above the track and below the roof, Rick made two large curtains using blue plastic tarp. There’s a rod through the lower edge of the tarps. The tarp curtains are swung up out of the way when the doors are opened, using light nylon rope controlled by pulleys.

He can open the moveable wall during the summer or when he needs to work on a big piece of equipment.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.