Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 40, No. 1 (2016)

Jim Stricker

Jim Stricker, Helena, Ohio

“I have a bunch of plastic fuel cans that originally came with flexible accordian-type spouts, which deteriorated after a few years. I replaced them with 3/4-in. dia. CPVC plastic pipe by cutting off the flex part of the old spout. I left the base of each spout so I could fit a piece of pipe into it. I cut about 3/8-in. off the end of a pipe fitting and slipped it over a piece of 3/4-in. pipe so I could slip it into the old nozzle stub. I glue that into the old nozzle. Then add a 45 degree “L” and another short pipe and a pipe cap on the end. You can glue the pipe together because the entire assembly will still pivot on the cap. This cheap do-it-yourself nozzle doesn’t leak.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.