Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 40, No. 1 (2016)

David Prause

Individual tip 1 of 2 from this reader’s published contribution.
David Prause, China Spring, Texas

“Because of sprocket wear, the reel drive chains on my 1968 New Holland 469 and 479 9-ft. haybines kept jumping off. Replacing the sprocket and the chains got expensive, so I got a small, flat idler pulley with ‘ears’ on either side of it and made a bracket for it with an adjustable arm that takes up any slack in the chain. The bracket is located between the haybine’s main drive sprocket and the reel sprocket. I installed the brackets 10 years ago and have never had to replace the chains since.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.