“I farm and operate a fabrication and repair shop. I also sell steel. I wanted to store the material neatly without spending a lot of money, so I started using the metal cages on chemical shuttles,” says David Lehman, Tribune, Kansas. His storage rack measures 24 ft. long and consists of 3 sets of double-stacked shuttle cages spaced 4 ft. apart. The upper and lower cages are held together by big metal bands and hose clamps. The cages are made of lightweight 16-ga., 3/4-in. O.D. galvanized tubing and have openings that measure either 8 in. sq. or 6 by 8 in.
“I made sure to pick cages with matching holes so the steel pieces will go all the way through them,” says Lehman.
“The longest pieces I use are 24 ft. long.
“It really works good. I have 6 kids at home and when I saw the economic downturn in agriculture coming, I knew I would need extra income. So I decided to start my welding business.” According to Lehman, shuttle cages are made of lightweight material but they’ll hold a lot of weight as long as the cage stays level.
“If you set the cages on a floor that isn’t completely flat they’ll collapse under the weight of whatever is in them,” notes Lehman. Contact: FARM SHOW Followup, David Lehman, 114 Glick, Tribune, Kansas 67879 (ph 620 376-8562; [email protected]).
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.