Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 39, No. 6 (2015)

Jim Weaver

Jim Weaver, Fairview, Mich.

“I was designing small equipment for a company and needed a press that could bend metal with nice looking corners, so I came up with this ‘poor man’s’ brake press that’s made out of 2 lengths of 1 1/2-in. angle iron.

“I welded 2 pieces of pipe along the bottom of one angle iron with the ‘V’ part of the angle iron facing up. Then I welded a short steel plate into the open bottom of another angle iron and welded a 1-in. dia. vertical steel ‘push rod’ onto it. I also welded on a pair of diagonal strap iron braces.

“To bend the metal I just place one angle iron on top of the other. The strap iron braces reinforce both ends of the top angle iron so it doesn’t bow up from the pressure.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.