Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW

Repairs & Maintenance

2077 shop tips and stories · page 18 of 35, newest issues first.

From the archive · Full text
Reader shop tip 1 of 3

Jeff King

Individual tip 1 of 3 from this reader’s published contribution.
Jeff King, Harwood, Md. (ph 443 506-9012)

“When fixing tires I use a skid loader-mounted forklift to break the bead. It works great because I can tilt the forks to almost any angle and slip them under the bead. The forklift only works to get…

Read the complete tip →
From the archive · Full text
Reader shop tip 1 of 2

Ernie Oshust

Individual tip 1 of 2 from this reader’s published contribution.
Ernie Oshust, Star, Alta.

“I’ve tried all kinds of chain lubricants on our round baler without much success. Finally I tried Motul motorcycle chain oil, which seems to be a superior chain lube (www.motorcycle-superstore.com).

Read the complete tip →
From the archive · Full text
Reader shop tip

Stop & Go International

Stop & Go International, Inc., 3610 Thunderbird Lane, Crystal Lake, Ill. 60012 (ph 800 747-0238; www.stopngo.com)

This company’s new tire repair kit allows for an “on the spot” and “on the wheel” repair to virtually any tubeless tire, and it seals the puncture on the inside. The Plugger is a spring-loaded gun that “drives”…

Read the complete tip →
From the archive · Full text
Reader shop tip 3 of 3

Gilbert F. Conn

Individual tip 3 of 3 from this reader’s published contribution.
Gilbert F. Conn, Pittsburgh, Penn.

“I often use my New Holland 555E backhoe, which is equipped with an extend-a-hoe, to lift machinery off the ground for easier maintenance or repair work. I can easily flip the machine over in mid-air. The backhoe can…

Read the complete tip →
From the archive · Full text
Reader shop tip 2 of 2

Jon Bell

Individual tip 2 of 2 from this reader’s published contribution.
Jon Bell, Lyons, Colo

“Another handy idea is that when I buy a come-along, I remove the slip hooks and permanently add about 2 ft. of chain with jam hooks to each end. This makes the come-along much more useful. They attach…

Read the complete tip →
From the archive · Full text
Reader shop tip 1 of 4

Ollie Maier

Individual tip 1 of 4 from this reader’s published contribution.
Ollie Maier, San Marcos, Texas

“On small chains where even a 1/4-in. hook is too large, I take a cut link from a somewhat larger chain that’s still small enough to fit in one of the links. I put the cut link in…

Read the complete tip →
From the archive · Full text
Reader shop tip 2 of 4

Ollie Maier

Individual tip 2 of 4 from this reader’s published contribution.
Ollie Maier, San Marcos, Texas

“To come up with an inexpensive but effective fire starter for a fireplace or brush pile, I simply tie an old sock in knots as tight as I can and soak it in a little diesel fuel or…

Read the complete tip →
From the archive · Full text
Reader shop tip 4 of 4

Ollie Maier

Individual tip 4 of 4 from this reader’s published contribution.
Ollie Maier, San Marcos, Texas

“I had been using a small chain to keep my larger tubular gates open or closed, until I discovered an easier method that also saves on the gate’s hinges. To keep the gate from sagging, I screwed the…

Read the complete tip →
From the archive · Full text
Reader shop tip 1 of 2

Dennis McCarville

Individual tip 1 of 2 from this reader’s published contribution.
Dennis McCarville, Two Harbors, Minn.

“Here’s a foolproof rust removing idea I discovered after many years of experience. If you have a part that is rusty or seriously corroded, simply soak it in water. Water is the best corrosion remover in the world,…

Read the complete tip →
From the archive · Full text
Reader shop tip

TP Tools

TP Tools, 7075 State Rt. 446, Canfield, Ohio 44406 (ph 800 321-9260; www.tptools.com)

They make a wall-mounted Spark Plug Cleaner that works like a mini sandblaster. It measures 6 1/2 in. high by 3 1/2 in. wide and comes with a cloth bag that holds 3/4 lb. of abrasive material.

Read the complete tip →
From the archive · Full text
Reader shop tip 1 of 2

Jim Kissock

Individual tip 1 of 2 from this reader’s published contribution.
Jim Kissock, New Bloomfield, Mo.

“My youngest son, David, has a good idea on how to get ice out of a livestock water tank. Just break the ice like usual and then use a fish net to scoop it out. Works great.

Read the complete tip →
From the archive · Full text
Reader shop tip 2 of 3

John Stava

Individual tip 2 of 3 from this reader’s published contribution.
John Stava, Bloomington, Ind.

“Rounding off corners on table tops with a drawing compass is time consuming and not always accurate. A better way came to me in a flash of inspiration. Take a tin can and set it on the table…

Read the complete tip →
From the archive · Full text
Reader shop tip 1 of 2

Joe Pozsgai

Individual tip 1 of 2 from this reader’s published contribution.
Joe Pozsgai, Capac, Mich.

“I had a piece of machinery in which the articulation pin would often seize up because the grease zerk was hard to reach. To solve the problem I ran a grease gun hose to the fitting, installing a…

Read the complete tip →