Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 33, No. 5 (2009)

Don Snilner

Don Snilner, Grand-Mere, Quebec

“Here’s a foolproof way to drill out broken bolts in engine blocks, heads or any other kind of housing whenever the bolt breaks off below the surface. Cut off a 3/4 to 1-in. length of the same size bolt. Using a drill press, drill the center of the bolt portion with a small drill. Install the drilled-out bolt in the top of the hole where the bolt is broken. Using the same small drill, drill out the broken bolt using the drilled bolt as a guide. Once the broken bolt is center-drilled, you can use a bigger bit to drill out the broken bolt and it’ll always stay centered.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.