Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 33, No. 2 (2009)

John Nicholls

John Nicholls, South Carolina

“Here’s an idea I came up with several years ago when I couldn’t find a jack stand that could be eas- ily adjusted to the correct height. Everything I had seen was either too short or too tall.

“I used 2 by 4 wood boards cut to a length of 8 3/4 in. I ripped a few of the boards into 1 1/2-in. widths, then screwed and glued them together as shown in the drawing. Then I just stacked the boards up, interlocking them at 90 degrees, until I got to the right height. I can get the jack stand to within 1 1/2 in. of the height I need. The boards will support a lot of weight and are useful for other jobs. They’re particularly handy when standing a ladder sideways on a stairway. And best of all, they’re free.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.