“The wooden handles on hammers, hatchets, axes, and other tools loosen up over time from use and from changes in humidity. I came up with a way to keep a hammer or hatchet head from flying off and injuring someone.
“I reset the handle until it’s tight, then drill a small hole through the center of the head. The hole should be slightly larger than a 16-penny nail. Then I place a nail through the hole and cut it off about 1/8 in. on the opposite side.
“Now I’m ready to peen the nail over as you would with any rivet. I place the nail head on a vise or anvil and use a ball peen hammer to finish the job.
“This simple process goes a long way toward preventing an accident caused by a hammer or hatchet head from flying off the handle.”
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.