Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW

Repairs & Maintenance

2077 shop tips and stories · page 2 of 35, newest issues first.

From the archive · Full text
Reader shop tip 1 of 2

Don Rowley

Individual tip 1 of 2 from this reader’s published contribution.
Don Rowley, Emery, S.D.

“I’ve had many back and hip surgeries and now have trouble putting on my socks. I took a 5-in. piece of schedule 40 PVC and made my own sock aid device. The ones you can buy didn’t work…

Read the complete tip →
From the archive · Full text
Reader shop tip

Fred J. Hall

Fred J. Hall, Monmouth, Ill.

“When bearing mounting areas become worn and can’t be quickly repaired, we don’t center punch the race (that doesn’t replace lost material). Instead, we use a 6 to 12-volt battery with jumper cables and a clean hacksaw blade…

Read the complete tip →
From the archive · Full text
Reader shop tip

Bruce Porkka

Bruce Porkka, Atlantic Mine, Mich.

“I had a double-acting steering cylinder leaking on a Case 1390 tractor. I’d read about SealLube in the “Best, Worst Buys” section of FARM SHOW. I used the additive as directed, and it worked great. I appreciate it’s…

Read the complete tip →
From the archive · Full text
Reader shop tip

Todd Boehm

Todd Boehm, Denmark, Wis.

“The gearbox mount bolts kept coming loose on my Deere 1209 haybine. Even double-nutted and torqued to 200 lb-ft, I’d lose bolts with less than 30 acres cut. I installed Nord-Lock cam-toothed washers and never lost another bolt.…

Read the complete tip →
From the archive · Full text
Reader shop tip 1 of 2

John Grawburg

Individual tip 1 of 2 from this reader’s published contribution.
John Grawburg, Lakeview, Mich.

“I have a Kubota ZG20 zero-turn mower that’s at least 15 years old. The PTO is really hard to reach and hook up. After many years and turning 80, I learned to lift the seat and connect from…

Read the complete tip →
From the archive · Full text
Reader shop tip 2 of 2

John Grawburg

Individual tip 2 of 2 from this reader’s published contribution.
John Grawburg, Lakeview, Mich.

“My 3-pt. York rake follows the front of the tractor up and down. I put the wheels a couple of feet behind it. I used a 3/8-in. chain for the upper link. Problem solved.”

Read the complete tip →
From the archive · Full text
Reader shop tip 2 of 3

John Rochester

Individual tip 2 of 3 from this reader’s published contribution.
John Rochester, Charlotte, N.C.

“I made myself a portable bolt-on workbench with a backstop to steady the work. The backstop needs to be shorter than the work to steady the square. I use a weight to hold the work because clamps get…

Read the complete tip →
From the archive · Full text
Reader shop tip 3 of 3

John Rochester

Individual tip 3 of 3 from this reader’s published contribution.
John Rochester, Charlotte, N.C.

“I capped live wires and wrapped both ends of the tape on the wire itself. Then, I put a cable tie over the ends. Hopefully, this will hold the tape after it ages and the glue goes bad.”

Read the complete tip →