Photo: FARM SHOWFrom the archive · Full text
Feature story
Featured source: Kevin Bealer
PA Performance has been building, customizing and modifying vehicles for more than 20 years. In the process they’ve learned how to upgrade electrical components to provide greater performance.
Read the complete story →
Photo: FARM SHOWFrom the archive · Full text
Feature story
Featured source: Wayne Tjeerdsma
“Pouring out of 5-gal. pails of liquid is easy with my portable Pail Tender,” says Wayne Tjeerdsma, Selectro Co., Avon, S. Dak. The Pail Tender is a 2-wheeled cart with a dispensing cradle at the top and a…
Read the complete story →From the archive · Full text
Reader shop tip
Dwayne Oxford, Holladay, Tenn
“Here’s how I store good pull-start springs off small engines. I drill a hole in the center of a suitable size lid, then wind the spring into the lid, beginning with the outer end. Then I thread 14…
Read the complete tip →
Photo: FARM SHOWFrom the archive · Full text
Feature story
Featured source: Ron Peck
Ron Peck has driven nearly 1.1 million miles delivering gravel with his Keystone Lime Co. Ford dump truck. They weren’t easy miles. The company quarry is on the west side of the highest point in Pennsylvania, and most…
Read the complete story →From the archive · Full text
Feature story
Featured source: Performance Injection Systems
You can boost horsepower on a 7.3 Power Stroke engine with remanufactured injectors from Performance Injection Systems (P.I.S.). The company offers a variety of options and is expanding to include common rail Dodge/Cummins engines from 2003 to 2007,…
Read the complete story →
Photo: FARM SHOWFrom the archive · Full text
Feature story
Featured source: Jerry Simmons
“I thought your readers might be interested in my 2 patented ‘looped hammers’ that can be used for many different jobs such as pulling up large nails and screws, cotter pins, oil seals, dowel pins, and much more,”…
Read the complete story →
Photo: FARM SHOWFrom the archive · Full text
Reader shop tip
Fred Thompson, Ferndale, Wash.
“I keep my Bucket Boss tool bucket on a lazy susan on my work bench. It keeps all my tools just a spin away.”
Read the complete tip →From the archive · Full text
Reader shop tip
O.J. Hanson, Kaycee, Wyo.
“I used to have frequent battery problems with my PA-18 Super Cub airplane. About 20 years ago I installed an Optima gel cell car battery and I’m still using that battery today with no problems. I had to…
Read the complete tip →From the archive · Full text
Reader shop tip 1 of 2
Individual tip 1 of 2 from this reader’s published contribution.
Tom Ashby, Abbeville, S.C.
“The best solution I’ve found to all my electrical corrosion problems is CorrosionX, a great corrosion preventative. Works on any and all electrical connections, cleaning and restoring electrical continuity. It works great! (www.corrosionx.com).
Read the complete tip →From the archive · Full text
Reader shop tip 1 of 3
Individual tip 1 of 3 from this reader’s published contribution.
Milan Hochstetler, Cumberland, Va.
“I mounted a car radiator fan on front of my riding mower to keep cool. I connected it to the original headlight switch.
Read the complete tip →
Photo: FARM SHOWFrom the archive · Full text
Reader shop tip 2 of 3
Individual tip 2 of 3 from this reader’s published contribution.
Milan Hochstetler, Cumberland, Va.
“The rope on my overhead shop door was too small to get a good grip, so I drilled holes through some golf balls and slid them onto the rope for a better grip. I tied a knot under…
Read the complete tip →From the archive · Full text
Reader shop tip
Vincent Gwaltney, Poseyville, Ind.
Vincent came up with a low-cost way to keep the front wheels on his 1952 Farmall SM tractor from wobbling and shimmying when moving rapidly down a smooth road.
Read the complete tip →From the archive · Full text
Feature story
Featured source: Firestone
If you do a lot of hauling or towing, Firestone’s Ride-Rite Air Helper Springs can make the job safer and the ride smoother. The airbag kit levels and balances loads as needed, reduces “bottoming out” and increases stability.
Read the complete story →From the archive · Full text
Reader shop tip
David Clark, Rome, Penn.
“My septic tank is more than 30 years old, and I was worried the tank would soon rust out and fail. I didn’t want to spend thousands of dollars to replace it. Also, according to the law here…
Read the complete tip →From the archive · Full text
Reader shop tip
Robert Boddy, Bloomingfield, N.Y.
“I mounted an electric generator to the base of a push lawn mower. It makes moving the generator from place to place much easier. Real handy.”
Read the complete tip →From the archive · Full text
Reader shop tip
Daniel Bullock, Mt. Sterling, Ill.
“The rubber caps around gear shift levers eventually rot out and leak water into the transmission. I came up with a no-cost waterproof fix using the top off a plastic water bottle.
Read the complete tip →From the archive · Full text
Reader shop tip 2 of 2
Individual tip 2 of 2 from this reader’s published contribution.
James Tostenson, Fremont, Wis.
“If you’ve got a weak battery, it can be renewed with a teaspoon of white sugar in each cell. Just be sure the water is at the correct level and be careful not to generate sparks around the…
Read the complete tip →
Photo: FARM SHOWFrom the archive · Full text
Reader shop tip 1 of 3
Individual tip 1 of 3 from this reader’s published contribution.
Vern Goodwin, Lincoln, Neb.
“I came up with an easy way to carry sockets to a job site. I screwed 3 socket-holding metal strips onto a 2-ft. long, 4-in. wide piece of kitchen countertop. I keep a 6 and 12-point socket next…
Read the complete tip →From the archive · Full text
Reader shop tip
Fifth Avenue Antique Auto Parts, 415 Court St., Clay Center, Kan. 67432 ph 785 632-3450; fifthaveinternetgarage.com
Their “remote battery stud” allows multiple electrical accessories to be powered directly from your battery. Works great when adding GPS monitors and related accessories in tractor cabs. The studs can be mounted anywhere and provide power direct from…
Read the complete tip →From the archive · Full text
Reader shop tip
L. Don Shumaker, Richfield, Ohio
“One of the most useful tools in my shop is a wire wheel buffer I made from a 1⁄2 hp electric motor and a 6-in. dia. wire wheel. I use it to buff rust off metal parts, and…
Read the complete tip →From the archive · Full text
Feature story
Featured source: Mark Cain
Instead of using an electric motor to pump solvent, this new portable parts washer uses your existing air compressor.
Read the complete story →From the archive · Full text
Feature story
Featured source: Jacob Kraybill
Cummins 3.3L industrial engines work great to repower smaller gas and diesel-powered vehicles, according to Jacob Kraybill, Cedar Grove Mechanics. He has used them to repower both a Ford Ranger and Toyota Tundra. He uses larger, heavy-duty Cummins…
Read the complete story →
Photo: FARM SHOWFrom the archive · Full text
Reader shop tip
Jeff Kumpf, Hopedale, Ill.
“On a rainy fall day, I decided to address the lack of organization of my air tools. I had been keeping everything in a drawer with almost no hope of finding what I needed. The air tools would…
Read the complete tip →
Photo: FARM SHOWFrom the archive · Full text
Reader shop tip
Loraine Tichenor, Sparta, Wis.
“I made this handy little wall-mounted cord reel out of wood. It comes in handy whenever I need to use my electric string trimmer to cut grass a long distance from our house. The reel can handle 100…
Read the complete tip →From the archive · Full text
Reader shop tip
Roland J. Begier, Tucumcari, New Mexico
“Here’s an idea for cleaning dirty, acid corroded battery terminals. Just turn on the lights or start the engine so current is running through, and then wash them off with a garden hose. It’s surprising how well it…
Read the complete tip →
Photo: FARM SHOWFrom the archive · Full text
Feature story
Featured source: Deb Del Piero
The Clog Hog drain cleaner works with many pressure washers to unclog sewer lines and pipes.
Read the complete story →
Photo: FARM SHOWFrom the archive · Full text
Reader shop tip
Glenn Negri, Ada, Okla.
“I got tired of losing those little red straws that come with spray lubricants and cleaners. I came up with a way to wire the straw to the can.
Read the complete tip →From the archive · Full text
Reader shop tip
Phil Tilley, Aragon, Ga.
“This is a simple idea but handy. I hook up an electric timer to my power tool battery chargers. It’s set for 1 hr. each day so it keeps them charged at all times without burning them out.”
Read the complete tip →From the archive · Full text
Reader shop tip
Vern Goodwin, Lincoln, Neb.
“I’m a motorcycle mechanic and storage space in my shop is always at a premium. I found myself running out of space so I mounted my shop lights on a shelf that lowers down when I need it…
Read the complete tip →From the archive · Full text
Reader shop tip
Butch Alcorn, Encampment, Wyo.
“I came up with this handy shirt pocket tool that lets me use wire clips to attach fence wire to T-posts. I start with a 6-in. spike and grind the point off, then drill a 1/8-in. dia. hole…
Read the complete tip →From the archive · Full text
Reader shop tip
Hemmings Motor News, (www. hemmings.com)
The popular auto magazine recently published a story about an old-time product designed to extend battery life. VX-6 was sold in a yellow and black box, often with a photo of NASCAR legend Lee Petty saying, “I’d rather…
Read the complete tip →From the archive · Full text
Reader shop tip
Lonnie Rixen, Sabula, Iowa
“The shifting cables on Deere combines and choppers can become gummy, making them hard to shift. To solve the problem, I remove the cable and put an electric drill on the end to turn the center wire as…
Read the complete tip →From the archive · Full text
Reader shop tip
Richard Townsen, Camden, Tenn.
“I have problems removing the rechargeable batteries from power drills. It’s hard for me to push in the clips on both sides of the battery. I solved the problem by breaking out the clips on both sides and…
Read the complete tip →From the archive · Full text
Reader shop tip
Robert Dagen, Conneaut Lake, Penn.
“The vents on some of the newer gas cans are located inside the nozzles. So, if you remove the nozzle to pour a full stream you have no vent.
Read the complete tip →From the archive · Full text
Reader shop tip 1 of 2
Individual tip 1 of 2 from this reader’s published contribution.
Steve Carey, Boulder, Mont.
“One of my best money-saving ideas was switching to synthetic oil in pickups and going three times the recommended oil change intervals. The savings really add up.
Read the complete tip →From the archive · Full text
Reader shop tip
Glen Schweppe, Syracuse, Neb.
Glen recently sent FARM SHOW photos of how he replaced the incandescent light bulbs on his old mercury vapor outdoor yard lights with compact fluorescent light bulbs (CFL), which are less costly to operate. He removes the transformers…
Read the complete tip →From the archive · Full text
Feature story
Featured source:
Elmer Fisher is in the business to provide customers – mostly Amish – with power tools that don’t require electricity. But his chopsaw powered by a weedeater motor may attract a wider variety of customers. The owner of…
Read the complete story →From the archive · Full text
Feature story
Featured source:
“It’s compact, lightweight, easy to use and completely eliminates the need for electrical cords and generators,” says Andrew Stoltzfus, Cooper Saws, Inc., about his company’s new gas-powered circular saw. The first-of-its-kind saw is powered by a 1.7 hp,…
Read the complete story →From the archive · Full text
Reader shop tip
Anonymous
“The electric clutch on my 1974 Deere 112 lawn mower stopped working. When I went to the dealer, they told me the part was no longer available. I took it apart and found a wire broken off where…
Read the complete tip →From the archive · Full text
Reader shop tip
Innovative Ag Products, (ph 919 926-8516; www.zplusag.com)
ZPlus-AG is an additive designed to protect older engines from premature wear. According to the company, EPA changes can cause trouble in engines built before 1985. EPA forced changes in engine oil, removing most of the Zinc Dialkyl…
Read the complete tip →From the archive · Full text
Reader shop tip
Richard Faber, Tiffin, Ohio
“I bought a can of BlueMagic Brush-On Electrical Tape that’s designed to waterproof electrical connections and is brushed on in a thin liquid coat (ph 888 522-2746; www.bluemagicusa.com). However, the shelf life wasn’t very long so I bought…
Read the complete tip →From the archive · Full text
Reader shop tip
Merrill Smith, Deer Park, Wash.
“I plumbed my entire shop with compressed air and electrical outlets every 12 to 15 ft. I use them to operate a big 10 hp, 3-phase air compressor equipped with a 200-gal. air tank that sets in back…
Read the complete tip →From the archive · Full text
Feature story
Featured source:
Converting to an electronic breakerless ignition system is a simple option for owners of old tractors with points and condensers. It improves fuel economy and makes starting easier.
Read the complete story →From the archive · Full text
Feature story
Featured source:
Steve Konieczki devised a way to use his DeWalt 18-volt battery charger to charge any brand of battery. In fact, he’s already moved on to an improved second-generation version. It all started when the Wasilla, Alaska, resident found…
Read the complete story →From the archive · Full text
Feature story
Featured source:
A natural lubricant made from lanolin, the natural lubricant found in sheep’s wool protects against corrosion and lubricates better than petrochemical lubricants, according to the New Zealand manufacturers of Prolan. Environmentally friendly, it’s non-conductive, resistant to saltwater, acid…
Read the complete story →From the archive · Full text
Reader shop tip
Al McRoberts, 1218 S. 11 1/2 Road, Harrietta, Mich. 49638 (ph 231 389- 0231)
“I make new wheel rims for antique motorcycles that ride on clincher tires. Clincher tires were state of the art from 1904 until the mid 1930’s and had beads made from cord instead of wire, which allowed them…
Read the complete tip →From the archive · Full text
Reader shop tip
James Tittle, Pembine, Wis.
“The batteries in my Milwaukee 12-volt electric drill wore out in about a year. Replacements are $40 or so. To get by until I could get a new one, I disassembled the battery pack, soldered an electric cord…
Read the complete tip →From the archive · Full text
Reader shop tip
Larry Hilliard, Sandy, Ore.
“In wet or snowy conditions, my 2000 Chrysler Grand Voyager mini van has a tendency to throw off the serpentine belt that drives the alternator and power steering pump. According to my service manager, all Chrysler-made minivans tend…
Read the complete tip →From the archive · Full text
Reader shop tip 2 of 4
Individual tip 2 of 4 from this reader’s published contribution.
Fred Homburg, Warsaw, Ind.
“I have 8-ft. wood shelf units in my shop. My wife had the idea of putting dividers in one of the shelves to store electrical cords. So we got 4 furring strips, used a chop saw to cut…
Read the complete tip →From the archive · Full text
Feature story
Featured source:
D.M. White got tired of his shop vac canister tipping over when he was cleaning out his vehicles. His solution was to mount the canister to his garage wall. It keeps the shop vac out of the way,…
Read the complete story →From the archive · Full text
Feature story
Featured source:
If you have starter problems with a 2940 Deere tractor or other 40 and 50 series tractors, Don Stewart has a suggestion. He rewires the starter circuit with low cost auto parts.
Read the complete story →From the archive · Full text
Reader shop tip
Joseph De Ruiter, Jr., Vesper, Wis.
“One of your readers recently reported how he uses an electric winch to power the lift arms on his Farmall. I have a better solution that I came up with on my Farmall B. I mounted an old…
Read the complete tip →From the archive · Full text
Reader shop tip 2 of 2
Individual tip 2 of 2 from this reader’s published contribution.
Wilson Rickenbaker, Lexington, S.C.
“To maintain good conductivity, I use brass or stainless steel fasteners on electrical connections, especially on old 6-volt equipment.”
Read the complete tip →From the archive · Full text
Reader shop tip
Enterprise Plastics, Inc., Kent, Ohio, (ph 330 346-0496; www.epstores.com)
This company sells a variety of replacement parts for Minneapolis Moline tractors. Examples include rubber moldings, headlight brackets, grilles, pivot pin spring clips, rubber gas tank mounts, battery supports and clamps, battery clamp ends, and tractor switch labels.…
Read the complete tip →From the archive · Full text
Feature story
Featured source:
“Used motor oil works just fine to power my 1998 Chevy 3500 4-door pickup, which has a 6.5 liter turbo diesel engine and 220,000 miles on the odometer,” says Carl Weaver of Lisbon, Ohio. Weaver converted his pickup…
Read the complete story →From the archive · Full text
Feature story
Featured source:
Arnold Otter, Molalla, Ore. developed a track tightener for his Bobcat skid loader to make a tough job easier. It worked so well the tool is now on the market.
Read the complete story →From the archive · Full text
Feature story
Featured source:
“When my old portable jump start battery recently went bad, I got the idea to make my own. I kept the cables and bolted them to a side post car battery that I bought used for $10. Now…
Read the complete story →From the archive · Full text
Reader shop tip 4 of 4
Individual tip 4 of 4 from this reader’s published contribution.
Bill Reeks, Cromwell, Ky.
“I used a short length of wire to connect the chuck on my air compressor with the blow nozzle. That way the nozzle is always there when I need it. It’s really handy when blowing dust out of…
Read the complete tip →
Photo: FARM SHOWFrom the archive · Full text
Reader shop tip 1 of 2
Individual tip 1 of 2 from this reader’s published contribution.
Al Burant, Barrys Bay, Ont.
“I find that cans or large pop bottles work well for storing long extension cords. I’ve used this idea for at least 30 years. I just coil up the cord and slip it into a can, which holds…
Read the complete tip →