Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 36, No. 5 (2012)

Glen Schweppe

Glen Schweppe, Syracuse, Neb.

Glen recently sent FARM SHOW photos of how he replaced the incandescent light bulbs on his old mercury vapor outdoor yard lights with compact fluorescent light bulbs (CFL), which are less costly to operate. He removes the transformers from the outdoor lights, leaving the crossbar that holds the shade on and leaving the electric eye on top. He drills 2 or 3 holes in the shade to accept snap-in porcelain lamp holders. Then he installs three 13-watt bulbs, which replace the yard light’s original three 60-watt bulbs.

“We’ve replaced all our mercury vapor outdoor lights with CFL bulbs this way, with no problems. As a result we’ve saved a lot on our electric bill,” says Schweppe.

“The CFL bulbs aren’t as bright as the original bulbs but they’re cheaper to operate. And if one bulb burns out there’ll still be two working lights. The shade comes with a round hole in the center, where I glue in a screen to keep bugs out.” Proper electrical rewiring is important, says Schweppe.

“All the outdoor lights I’ve worked on have 3 wires coming out of the electric eye. On the wires coming in, I use the black as positive and hook it up to the other black wire on the electric eye. I hook white or negative to all white wires. I hook up the red wire from the electric eye to all black wires from the lamps.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.