Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW

Equipment

1669 shop tips and stories · page 23 of 28, newest issues first.

From the archive · Full text
Reader shop tip 1 of 3

Pete Peters

Individual tip 1 of 3 from this reader’s published contribution.
Pete Peters, Osler, Sask.

“Here are a couple of back-saving ideas I use. First, I made a heavy-duty cart from the front axle and wheels off an old riding mower. It works great for moving auger engines and other heavy items without…

Read the complete tip →
From the archive · Full text
Reader shop tip 3 of 3

Pete Peters

Individual tip 3 of 3 from this reader’s published contribution.
Pete Peters, Osler, Sask.

Peters also passed along an electrical idea.“If you need to replace the alternator on an older tractor, combine, or other vehicle, its simple to make the changeover from the old external regulator style to the newer internal regulator…

Read the complete tip →
From the archive · Full text
Reader shop tip 2 of 2

Robert T. Valentine

Individual tip 2 of 2 from this reader’s published contribution.
Robert T. Valentine, 417 Commercial Ave. S., Wolsey, S. Dak.

“I solved another problem with a broken spindle on our Oliver 1650 tractor. The 1650 uses the same spindle found on an Oliver 88 tractor. I removed the spindles complete with the outside housing and also the wheel…

Read the complete tip →
From the archive · Full text
Reader shop tip 3 of 3

Don Lasee

Individual tip 3 of 3 from this reader’s published contribution.
Don Lasee, Don’s Welding & Repair, 2486 Hwy. 32, Krakow, Wis. 54137 ph 920 899-3690

“I use a product called Sportsman Goop to repair the rubber steering wheel on an old tractor. After years of exposure to the sun, the rubber had dried out and cracked. Big pieces of rubber fell off, making…

Read the complete tip →
From the archive · Full text
Reader shop tip 1 of 2

Pete Peters

Individual tip 1 of 2 from this reader’s published contribution.
Pete Peters, Osler, Sask.

“I made a ramp for servicing garden tractors out of 4 by 4 treated posts set into the ground. I fastened old rubber belting onto the ramps for better traction. This permanent installation makes it easy to make…

Read the complete tip →
From the archive · Full text
Reader shop tip 1 of 2

Leroy Klesel

Individual tip 1 of 2 from this reader’s published contribution.
Leroy Klesel, Halletsville, Tex.

“Older Farmall tractors with 6-volt systems are hard to crank. We changed our electrical system over to 12 volts by installing a 12-volt battery, a 12-volt Delco alternator, and put a resistor between the switch and the coil.…

Read the complete tip →
From the archive · Full text
Reader shop tip

John Meyers

John Meyers, S&H Industries, Inc., 5200 Richmond Road, Cleveland, Ohio 44146 (ph 800 253-9726; fax 216 831-9573; E- mail: [email protected]; Website: www.shindustries.com)

“Our mechanical ‘friction jack’ provides up to 3,000 lbs. of mechanical muscle to push or pull things into place. It was originally developed for auto body repairmen to push or pull body components back into line. However, it…

Read the complete tip →
From the archive · Full text
Reader shop tip

Rich Bednarski

Rich Bednarski, 215 South Buffalo Rd., Washington, Pa. 15301 (ph 800 832-6350 or 724 345-3546)

“I can supply all the parts necessary to rebuild mechanical-style torque amplifiers found on old International Harvester tractors made in the 1950’s and early 1960’s, and I can also rebuild them. My torque amplifier parts are less expensive…

Read the complete tip →
From the archive · Full text
Reader shop tip

Roy Crane

Roy Crane, Martinsvile, Ill.

“On an International Harvester 1460 combine, the pan under the beater was hard to raise or lower because it doesn’t have any way to get ahold of it. I replaced the short bolts on the rear of the…

Read the complete tip →
From the archive · Full text
Reader shop tip

Frankie Purser

Frankie Purser, 680 Purser Rd., Vanceboro, N.C. 28586 (ph 252 244-0750)

“I installed a kit from Ford New Holland on my TW 15 tractor that lets me disconnect the remote hydraulic outlets without having to get off the tractor and use levers. The kit consists of a small Teflon…

Read the complete tip →
From the archive · Full text
Reader shop tip

Matthew Lebold

Matthew Lebold, Kennabeek, Ontario

“Over the years we’ve worked on different IH tractors with stuck priority valves and have come up with an easy way to remove the valves. We push a 6-in. long, 1/4-in. dia. fuel line onto a 1/4-in. threaded…

Read the complete tip →
From the archive · Full text
Reader shop tip 1 of 3

Steve’s Heavy Equipment & Diesel Service

Individual tip 1 of 3 from this reader’s published contribution.
Steve’s Heavy Equipment & Diesel Service, 15830 Carver Highlands Drive, Carver, Minn. 55315 ph 952 448-2429; Website: www.skidsteerstuff.com)

“Our anti-theft switch kit for skid steer loaders interrupts the circuit to the electronic solenoid that activates the fuel pump. The engine turns over but won’t start. Works on diesel models only. The kit consists of connectors that…

Read the complete tip →