Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 25, No. 6 (2001)

Robert Dunton

Individual tip 1 of 2 from this reader’s published contribution.
Robert Dunton, Topeka, Ill.

“The first thing I did when I bought my new 3-pt.

mounted King Kutter mower was to mount a pair of 12-in. high gauge wheels on the front side. I use the mower along roadsides and right-of-ways. The gauge wheels keep the rig mowing evenly and prevent the deck from gouging the ground, which my landlord greatly appreciates. Each wheel is attached to the mower’s 3-pt. bracket by a 1 by 3-in. flat metal bar. Deck height is controlled by adjusting a threaded rod with jamb nuts at each end. I set up my 8-ft. Bush Hog mower the same way, adding four gauge wheels on front of it.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.