From the archive · Full text
Reader shop tip
Robert Rottinghaus, Clever Tech, Inc., 4121 South Canfield Road, Jesup, Iowa 50648 (ph 319-827-1311)
“Our new Drive Chain Disconnect for White 5100 to 6100 and 8000 corn planters saves wear and tear on chains, bearings and sprockets. It quickly installs in place of the original chain tightener and you add 4 in.…
Read the complete tip →From the archive · Full text
Feature story
Featured source:
Gerald Neumann has easy access to an electric outlet wherever he goes in his 30 by 42-ft. shop thanks to a wall-mounted overhead boom.
Read the complete story →From the archive · Full text
Reader shop tip
Dan Miles, Dalton, Neb.
“I use small, high-quality pallets from computer equipment shipments to make wheeled dollies for my shop. I buy caster wheels, attach them to the corners, and put all kinds of things on wheels in my shop. It’s much…
Read the complete tip →From the archive · Full text
Reader shop tip
Howard L. Marolf, Montrose, Co.
“I’m retired but work on restoring tractors in my shop. I added an extension to the side of my farm shop to work on tractors in the winter. The walls are made from corrugated fiberglass to let lots…
Read the complete tip →From the archive · Full text
Reader shop tip
John Porter, Albion, Mich.
“Don’t throw old socks away. Fill them with sawdust, tie off the ends, and put them in a plastic bucket. When you want to chink up a cold draft at a door or window – or if you…
Read the complete tip →From the archive · Full text
Reader shop tip
Neal Darsby, Red Level, Alabama
“I took a large poultry house fan and built a frame on wheels for it that lets me wheel it around the farm. It provides great ventilation in the summer when working on equipment in the shop, and…
Read the complete tip →From the archive · Full text
Reader shop tip 2 of 2
Individual tip 2 of 2 from this reader’s published contribution.
Ronald Adams, Louisville, Miss.
“One handy tool in my shop is an old child’s swingset. A chain fall is attached to it to pick up the front end of my riding mower when I need to sharpen the blades. Also makes it…
Read the complete tip →From the archive · Full text
Feature story
Featured source:
Richard Stephens built a 40 by 60-ft. shop using 14 and 26-ft. long sections of highway guard rails for the framework.
Read the complete story →From the archive · Full text
Reader shop tip 2 of 2
Individual tip 2 of 2 from this reader’s published contribution.
Dean Hertzler, Veteran, Wyo.
“We installed metal hydride lights in our 40 by 60-ft. shop with three 20-ft. bays. There’s one 400-watt overhead bulb and two 250-watt wall-mount bulbs in each bay. They’re expensive to purchase, but I can finally see without…
Read the complete tip →From the archive · Full text
Reader shop tip 2 of 2
Individual tip 2 of 2 from this reader’s published contribution.
Marvin W. Anderson, Glyndon, Minn.
“I repaired the plastic door hinge roller on a 1984 Pontiac Fiero by removing the top pin and roller, and then drilling out the bottom part of the pin and tapping it so the proper sized bolt fits…
Read the complete tip →From the archive · Full text
Feature story
Featured source: Mark Snider
Mark Snider made a handy shop light from two inexpensive 4-ft. fluorescent light fixtures and some gas pipe.
Read the complete story →From the archive · Full text
Reader shop tip
Truman J. Miller, Wheatland, Mo.
“When I ordered trusses for my shop I asked for heavier steel - 1/4 in. thick vs. 1/8 in. thick. Then I bolted a steel beam underneath so that I can use trolleys and chain hoists to lift…
Read the complete tip →From the archive · Full text
Reader shop tip
Steve Minarick, Morse Bluff, Neb.
“Putting three overhead hoists in our shop has made working on equipment much easier. It also makes it safer and easier to unload pickups and trailers. We use one of them almost every day. No more hurt backs…
Read the complete tip →From the archive · Full text
Reader shop tip 2 of 2
Individual tip 2 of 2 from this reader’s published contribution.
Glen Teel, Hays, Kansas
“We buried an old tank next to our shop and put our high pressure washer down inside it so it won’t freeze, allowing us use the pressure washer during the winter. We also store paint inside the tank.”
Read the complete tip →From the archive · Full text
Reader shop tip
Mike Toppen, Burnips, Mich.
“With all the interest in wind power, lots of people are taking old car alternators and rebuilding the armature for use on a homemade windmill. I’ve found that by using high power permanent magnets, I can improve power…
Read the complete tip →
Photo: FARM SHOWFrom the archive · Full text
Feature story
Featured source: Great Lakes Equipment Company
Looking for used or reconditioned parts for Caterpillar equipment? A great place to start your search may be Great Lakes Equipment Company. Since 1933 the company has been serving the heavy equipment industry. With over 26,000 parts in…
Read the complete story →From the archive · Full text
Feature story
Featured source: Roger Gutschmidt
“A lot of the front wheel assist (FWA) hydraulic motors on older 20, 30 and 40 series Deere tractors are leaking now, and many people don’t know where to go to get them repaired,” says Roger Gutschmidt of…
Read the complete story →From the archive · Full text
Reader shop tip 2 of 3
Individual tip 2 of 3 from this reader’s published contribution.
Bill Reeks, Cromwell, Ky.
“To carry plywood, sheet rock, doors, and other large panels, I make a loop of rope and wrap it around the two lower corners and grab it in the middle.
Read the complete tip →From the archive · Full text
Reader shop tip
Larry Schoborg, Union, Iowa
Larry found a simple way to make 55-gal. drums more usable around the shop. He cuts hand holds under the top rim on both sides and then smooths out the metal so it’s easy on the hands. It…
Read the complete tip →From the archive · Full text
Reader shop tip
Rex Gogerty, 33475 K. Ave., Hubbard, Iowa 50122 ph 641 487-7617
“I bolted a 5-in. wide metal plate to the back side of a broom. Works great for dislodging mud, ice and manure. I started with a metal plate about 5 in. long on one end and 8 in.…
Read the complete tip →From the archive · Full text
Feature story
Featured source: Chris Kornkven
When the original engine on his old Case 1816 skid steer loader went bad, C h r i s Kornkven, Helenville, Wis., replaced it with a new Briggs & Stratton 16 hp engine.
Read the complete story →From the archive · Full text
Reader shop tip
Brian Seckman, Weston, W. Va.
“I needed a vented door for a closet where I keep my hot water tank. To save money, I used an ordinary heat register vent and cut a hole the same size as the vent in the door.…
Read the complete tip →From the archive · Full text
Reader shop tip
Elmer Pinkerton, Elmwood, Neb.
“I bought a four-post car hoist and erected it outdoors. To do the lifting it uses link speed chains that are exposed to the weather. To lubricate the chains, I mix 80 weight gear oil with an equal…
Read the complete tip →From the archive · Full text
Reader shop tip
Tom Christensen, Blackfoot, Idaho
“Let’s say I have a flat tire but am fairly close to a tire shop. Instead of changing the tire I use an air hose that’s long enough to reach between the flat tire and the vehicle’s spare…
Read the complete tip →From the archive · Full text
Feature story
Featured source: James McGowan
A few minutes with a bandsaw can turn any old upright vacuum cleaner into a trash blaster, says James McGowan.
Read the complete story →From the archive · Full text
Feature story
Featured source: Fred Davison
Instead of spending $1,000 to install a door opener for his old shop door, Fred Davison bought a $50 reversible drill and rigged up a pulley system. He simply uses the drill to open and close the 16…
Read the complete story →From the archive · Full text
Feature story
Featured source: Tim Queeno
Tim Queeno’s woodworking bench is filled with sharp chisels and planes thanks to his Sharpening Sled, which was the result of eight years of making prototypes. The end result worked so well he started making them for sale.
Read the complete story →From the archive · Full text
Reader shop tip
Lamar F. Walden, Tulare, Calif.
“This is an old one but the concept might help someone. In 1986 I bought a 1978 Oldsmobile 98 4-door diesel sedan. It had a 200 turbo transmission with no overdrive. I made a few long trips and…
Read the complete tip →From the archive · Full text
Reader shop tip
Don B. Dallman, Nokesville, Va.
“My granddaughter had 81 leftover baby food jars that she had saved. I put them to use in my shop by building an octagon-shaped, rotating screw-and-parts holder that really works well. The rotating drum is made from 1…
Read the complete tip →From the archive · Full text
Reader shop tip
Ian Brent Letterly, Lanark, Ontario
“I have a small shed with a concrete floor. To move equipment, I use snowmobile dollies. Just a little shove and the equipment rolls around easily.”
Read the complete tip →From the archive · Full text
Feature story
Featured source: George Friesen
On cold winter days George Friesen of La Crete, Alberta, pumps anti-freeze out of the ground to start his van.
Read the complete story →From the archive · Full text
Feature story
Featured source: T.C. Mallett
T.C. Mallett, Austin, Texas, converted a pair of 10-ft. long used conveyor roller sections into a cutting table that can be used with a metal chop saw or a mitre saw.
Read the complete story →From the archive · Full text
Reader shop tip
Corneil Hiebert, Altona, Manitoba
“I converted an old barbeque grill into this por- table power sanding machine. First I removed the grill from the stand and replaced it with some wooden boards. Then I mounted a belt-disc sander onto it (any other…
Read the complete tip →From the archive · Full text
Reader shop tip
Frank Miller, Beecher City, Ill.
Frank came up with a simple cart equipped with a high rise handlebar, which makes it much easier to maneuver his salamander shop heater. He welded a square box steel frame to the base of the heater. Then…
Read the complete tip →From the archive · Full text
Reader shop tip
Larry A. Bauman, Connell, Wash.
“I installed medal siding on the walls and ceil- ing of our shop. It resulted in better lighting and is easier to keep clean.”
Read the complete tip →From the archive · Full text
Reader shop tip
Veril Dietzmann, Brenham, Texas
“I attached a chain hoist to a rafter in my shop in order to pick up big equipment such as disk harrows and lawn mowers. Makes repairs easier.”
Read the complete tip →From the archive · Full text
Reader shop tip
ATVparts.com, 3868 Pine Hill Road, Newport, Vt. 05855 ph 802 487-1000; fax 802 487-1015
It’s one of the largest selec-tions of new and used parts for most years, makes, and models of ATV’s. Some of the items offered include carburetor kits, oil filters, pistons, gaskets, brakes, sprockets, chains, wheel bearings, and tires.…
Read the complete tip →From the archive · Full text
Reader shop tip 2 of 2
Individual tip 2 of 2 from this reader’s published contribution.
Daniel Ball, Pomerene, Arizona
“The wheels on roller blades and skate-boards are built out of high quality poly material. They have double ball bearings and a 1/4 or 5/16-in. thick axle. They have excellent weight carrying capacity. I’ve used them on a…
Read the complete tip →From the archive · Full text
Reader shop tip
Alan Altenbach, Reedsburg, Wis.
“My 3-pt. mounted log splitter is so heavy that I had to come up with an easier way to move it around. I made a dolly with 3 caster wheels so when I’m finished with it, I just…
Read the complete tip →From the archive · Full text
Reader shop tip
Dennis Drake, Ault, Colo.
“I use Irish Spring bar soap to keep mice out of tractors, tanks, combines, and buildings around the farm. I cut bars up into 6 pieces and put them wherever mice are a problem. In buildings, I put…
Read the complete tip →From the archive · Full text
Reader shop tip
Kenneth Gadd, Moose Jaw, Sask.
Sliding barn doors are often hard to open or close. Kenneth made it a lot easier by mounting hand-cranked winches on the doors along with a pulley. He hooks the cable up one way to open the door…
Read the complete tip →From the archive · Full text
Reader shop tip 1 of 2
Individual tip 1 of 2 from this reader’s published contribution.
Marlin Mullins, Terry, Miss.
“When rebuilding old fences, often times the metal T posts are bent at the ground when pulled, or they’re very rusty below ground. I have found you can cut off the bottom and weld another piece on quite…
Read the complete tip →From the archive · Full text
Reader shop tip 2 of 2
Individual tip 2 of 2 from this reader’s published contribution.
Marlin Mullins, Terry, Miss.
“I put an old solid-core door on top of a hospital-type gurney cart. Makes a very handy portable workbench. I also made several small caster carts that are about 2 by 2 1/ 2 ft. in size, fitted…
Read the complete tip →From the archive · Full text
Reader shop tip
Ralph Rumbley, Monroeville, Ala.
“I bought an old Deere planter and discovered that a gear on one of the planter units was missing. It was no longer available from the dealer. I had taken a course in aluminum casting many years ago…
Read the complete tip →From the archive · Full text
Reader shop tip
Richard Duren, Riverdale, Ga.
“My thanks to James McGowan for the idea in a recent issue of drilling holes in his shop’s concrete floor to drop bolts into to keep his ramps from sliding. I had braced my ramps with boards many…
Read the complete tip →From the archive · Full text
Reader shop tip
Roy Stillman, Kane, Penn.
“We use snowmobile dollies under equipment in our garage to move things around easily. They’re a great way to make use of all available space. You can buy them at any snowmobile shop, or on the internet.”
Read the complete tip →From the archive · Full text
Reader shop tip
Galen Garber, Conneautville, Penn.
“Installing heat in the floor of my shop was the best thing I did when I built the shop 10 years ago. The only thing I’d do different would be to use some of the better products that…
Read the complete tip →From the archive · Full text
Reader shop tip
Larry Schoberg, Union, Iowa
“I operate a farm machinery repair shop and go through a lot of oil. This high-rise barrel rack makes it easy to store various fuels and chemicals. The rack is made out of channel iron and square tubing…
Read the complete tip →From the archive · Full text
Feature story
Featured source: McTavish Steelworks Ltd.
If you’ve got a tired, worn out workbench in your shop, take a look at this heavy duty steel bench made by McTavish Steelworks. The 10-ft. long work bench is made from 16-gauge steel. It has easy roll-out,…
Read the complete story →From the archive · Full text
Reader shop tip
James Rissler, Hopkinsville, Ky.
“I’d like to warn your readers about the use of ethanol in gas engines. I have a small engine repair shop and see a lot of small engines ruined from the use of ethanol fuels. Chain saws and…
Read the complete tip →From the archive · Full text
Reader shop tip
Philip G. Lumley, Wilkesport, Ontario
“I had a 4-ft. long wood burning stove made for my shop, using a 24-in. dia. by 30-in. long, 1-in. thick pipe with a custom built 30 by 36-in. water jacket surrounding it. The water jacket holds 70…
Read the complete tip →From the archive · Full text
Feature story
Featured source: Dennis Hageman
When Dennis Hagen was a young carpenter, he needed a table saw for fine angle cuts. Since he couldn’t afford to buy one, he built one. Nearly 50 years later, the saw retains an honored place in the…
Read the complete story →From the archive · Full text
Reader shop tip
Ron Cook, Hopedale, Mass.
Ron is a home inspector who sees a lot of interesting sights while looking over all kinds of property. He recently spotted this arrangement on a pair of garage doors. The owner apparently did not want to buy…
Read the complete tip →From the archive · Full text
Reader shop tip 2 of 2
Individual tip 2 of 2 from this reader’s published contribution.
Bob Aubrey, Batavia, N.Y.
“I collect classic cars. To undercoat cars safely without rotting the rubber seals, I use a mixture of 95 percent vegetable oil and 5 percent Marvel Mystery oil in a Windex spray bottle. It really works great because…
Read the complete tip →From the archive · Full text
Feature story
Featured source: Dale Denton
Dale Denton, Cowden, Ill., is a retired machinist with a well-equipped country shop. He has a reputation for being able to rebuild expensive farm equipment parts for a lot less than new. One of his most cost-effective re-pairs…
Read the complete story →From the archive · Full text
Reader shop tip 2 of 2
Individual tip 2 of 2 from this reader’s published contribution.
Duluth Trading Co., Belleville, Wis. ph 800 505-8888 or 877 382-2345; www.duluthtrading.com)
The company also offers flexible magnetic tape that allows you to put a magnetic backing on nearly any object around your home, shop or office. You get 25 ft. of 1/2-in. wide adhesive-backed magnetic tape. Just cut a…
Read the complete tip →From the archive · Full text
Reader shop tip
Lloyd Fraase, Sangamon County, Ill.
He was so intent on having a shop with an ad- equate traveling hoist that when building a new shop, he first built the hoist and then the building around it. The hoist measures 16 ft. high up…
Read the complete tip →From the archive · Full text
Reader shop tip
Mark Conyers, Weatherford, Texas
“A good idea I had when I built my shop was to insert a 4-in. sq. steel tube post into the ground before the floor was poured. There’s a flat steel plate on top for mounting a large…
Read the complete tip →From the archive · Full text
Reader shop tip
Lee Horstmeier, Pecatonica, Ill.
“I put a motion detector light up on the opposite wall from the walk-in door in my shop. When it gets dark enough the light comes on when I exit. And I don’t have to remember to turn…
Read the complete tip →