Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 32, No. 4 (2008)

Rex Gogerty

Rex Gogerty, 33475 K. Ave., Hubbard, Iowa 50122 ph 641 487-7617

“I bolted a 5-in. wide metal plate to the back side of a broom. Works great for dislodging mud, ice and manure. I started with a metal plate about 5 in. long on one end and 8 in. long at the other. I bent it at a 35 degree angle, then drilled a hole through the plate and also through a plastic holder for the broom handle. A 1/2-in. dia., 2 1/2-in. long bolt runs through the plate and plastic holder and into the board that holds the broom. A nut and lock washer holds it on.

“Works great in my garage and shop because I can scrape stuff off the floor without having to stoop over. I can use the scraper to knock stuff loose, then push it away with the broom. It isn’t designed to do heavy duty digging but on a cement floor it works great.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.