Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 22, No. 1 (1998)

John Cooke

John Cooke, Monroe, Conn.

“When I got tired of hitches twisting on my drawbar, I bent a piece of 1/4 by 2-in. scrap iron into an inverted V shape with a flattened apex. I torched a 3/4-in. dia. hole in the flat to accept a Cat # 1 pin and welded the free ends to the drawbar. I welded two balls and a pin to accept a pintle hitch to the bar. Pinned in the top, it has enough movement to prevent bending and raises and lowers on the lift arms almost perfectly.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.