Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 22, No. 1 (1998)

Gregory L. Reif

Gregory L. Reif, Claflin, Kan.

“I needed a transmission jack but couldn’t jus-tify a new one so I built my own. I used two pieces of 3/8-in. thick steel plate - one 18 by 18 in. and the other 10 by 10 in. I welded a scissor jack between the two plates. Four swivel casters under the bottom plate let me roll it all over the shop. A 1/2-in. drive ratchet raises and lowers the jack easily even with a transmission resting on it. I welded eyes to the sides of the top plate for tie downs.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.