Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 22, No. 1 (1998)

George “Bing” Ribble

George “Bing” Ribble, Hettick, Ill.

“I built this high pressure washer out of a re-built compressor from a local car wash. It’s powered by a 5 hp electric motor off an old silo unloader. I added a second pulley to the compressor to get the rpm’s up high enough to develop 2,000 psi for washing. An old car jack installed between the motor and the pulleys serves as a belt tightener.

“The machine mounts on a cart built out of sq. tubing and fitted with two old lawnmower wheels.

“A garden hose connects the pump to any standard water faucet. Out the output side, I use 50 ft. of 1/4-in. dia. hydraulic hose and a wand-type spray nozzle.

“It didn’t cost more than $200 to build and works as well as any commercial unit to keep my equipment clean.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.