Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 31, No. 6 (2007)

Mark Johnson

Mark Johnson, Baudette, Minn.

“To lube sealed bearings, just drill a 1/6-in. hole in the metal part of the bearing and use a needle to inject the lube. I’ve used the idea on CV joints, U-joints, bike axles, bike ped-als, etc. After injecting grease, the hole can be sealed with tape or some other sealer, if necessary.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.