Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 31, No. 6 (2007)

Charles H. Bratton

Charles H. Bratton, Albuquerque, New Mexico

“The drive cable on string-type weed trimmers has to be greased frequently, a job that requires removing the entire drive assembly. To make it easier, I drilled and tapped a 1/4-in. by 28-in. thread and installed a grease zerk at the base of the trimmer head shaft housing. Then midway from the trimmer head to the engine mounting, I drilled a 3/16-in. dia. hole in the housing. I use a pointed grease adapter with a grease gun and pump in four or five shots of grease. To keep dirt out I put a 3/4-in. hose screw clamp over the hole and tightened it. It’s a quick, easy solution.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.