“Large holes can be bored on a lathe without having to use a time-consuming free plate mounting. A 1 1/2-in. long piece of pipe, faced square, and with an inside diameter slightly larger than the outside diameter of the desired hole, is accurately positioned on the plate. Attach to the plate with three 1/2-in. long welds positioned 120 degrees apart. Chuck the pipe into the 3-jaw universal chuck and bore the hole. Carefully remove the tach welds with a disc grinder.”
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.