Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 49, No. 6 (2025)

Made-It-Myself Tractor Scraper Receiver Hitch

Featured source: Jeff Buckner, Canon City, Colo.
Made-It-Myself Tractor Scraper Receiver Hitch
Photo: FARM SHOW · Vol. 49, No. 6 (2025) · p. 33

Jeff Buckner from Canon City, Colo., created a versatile tractor scraper receiver hitch.

“The scraper is usually attached to my tractor,” Buckner says.

“I needed a way to attach different tools to it, so I took a receiver hitch that a Navy buddy gave me (we served on the USS Constellation CV-64) and cut it down.”

He then used mounting brackets to fit it around the scraper’s pivot.

“I drilled and tapped holes for it so that I could remove it if ever I needed to.”

Buckner has a variety of tools and equipment that can fit in it.

“Along with the normal hitches, I have an engine hoist, vice, winch, engine mount, etc. I made it so that it wouldn’t interfere with the basic operation of the scraper.”

Contact: FARM SHOW Followup, Jeff Buckner, 45780 W. US Hwy 50, Canon City, Colo. 81212 (ph 719-275-2035; [email protected]).

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.