Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 48, No. 4 (2024)

Fritz Groszkruger

Individual tip 1 of 2 from this reader’s published contribution.
Fritz Groszkruger, Dumont, Iowa
Fritz Groszkruger
Photo: FARM SHOW · Vol. 48, No. 4 (2024) · p. 33

“The hydraulic coupler leaked on a Deere 5105M. The two cams and lever that pulled it tight had worn and cost $500 to replace. I welded to build them up, and it was tight. After another $250 for cartridges, I bought $16 worth of fittings. It’s not quick, but it doesn’t leak.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.