
“For lack of a better name, this is a ‘Pedal Presser Downer’ tool. You press down the gas or brake pedal of a car or track and put this tool in place to hold the pedal down. This idea came from an auto mechanic whom I worked with briefly in 1984. It’s easy to make and is a handy tool to have for checking brake lights, adjusting the brake light switch, temporarily increasing engine speed for battery charging or making other adjustments.
“The dimensions can vary, depending on what scrap materials are used and what vehicle or machinery it’s used on. For this one, I used 2 ft. of 1 in. dowel and a plank that’s 1-in. by 2 in. by 12 in. The hole in the plank is 1/8 in. larger than the dowel’s diameter. It’s a close fit so that the plank has to be only slightly out of square with the dowel to lock it in place on the dowel. A nail in each end of the dowel keeps the plank from sliding off when the tension is relieved.”
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.