When Carl Stoloski needed to replace some outbuilding doors, he initially planned on using an old school track and pulley system for rolling the new doors open and closed.
“When you buy track and the necessary hardware, you don’t get much for the money,” he says.
“I thought I could use what I had instead.” First, he cut the track to the length he needed, then welded 6-in. brackets every foot to secure it with lag screws above the doorway. On the doors, he used three stair-stepped thinner pieces of metal to give a stylish look. He drilled a hole in them for the track wheel axles to slide through and then put everything together on the track. When it was in place, he tacked a small weld on the pin to hold it secure.
“If you have trouble with a wheel or axle, just knock them out and slide a new one in. One or two scrap doors give you plenty of wheels and track.” Stoloski says the door systems work well and look sharp enough to use either indoors or outdoors. Contact: FARM SHOW Followup, Carl Stoloski ([email protected]).
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.