Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 46, No. 4 (2022)

LeRoy Momper

LeRoy Momper, Fredonia, Wis.

“I’ve tried many kinds of moisture and corrosion-proof wire connections on my trailers and farm equipment, but they all failed, especially under harsh conditions. Soldering makes a good connection, but the flux corroded the connections over time. When using shrink-tube with multiple wires, there is always a gap for moisture to enter between the wires and corroded the connections. I solved the problem by wire-nutting the wires together using a wire-nut one size larger than required. Then the wire-nut is filled with glue using an electric glue gun, making sure that the glue surrounds each wire. The glue is non-corrosive and seals the connection from moisture. Also, it makes a very strong connection. I’ve been using this method for over 10 years without any failures.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.