Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 46, No. 4 (2022)

Mike Mitchell

Individual tip 2 of 2 from this reader’s published contribution.
Mike Mitchell, Fairbanks, Alaska

“When I use spray foam, I don’t always need the whole can. When that happens, immediately after I’m done spraying the foam, I unscrew the plastic nozzle, spray some brake cleaner into the end that screws into the can, and blow it clean with compressed air. Then I do it one more time to get it really clean of foam residue. I also spray brake cleaner in the top of the can where the foam comes out into the nozzle and hit that with air as well. Then I tape the nozzle to the can for next time. You can do this cleaning process again each time you use a little more foam. It sure saves money on throwing half-filled cans away and you’re not tempted to spray foam in places you’ll later wish you hadn’t, just because you didn’t want to waste half a can.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.