Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 46, No. 2 (2022)

Fred Schulz

Fred Schulz, Woodland, Wash.

“Punching Holes in shim stock for bearing halves without tearing or wrinkles can be done by drilling a hole in a piece of flat bar the size desired. Turn up a short piece of round stock to fit the hole. Grip the round stock in the drill press chuck and lay flat bar on the drill press table. Pull the spindle handle down to engage the two pieces. Clamp the flat bar securely for a ‘hurry-up’ punch press.

“If you want something more permanent for many holes, use case-hardened material. A concave grind on the punch will help. I have easily punched brass stock up to 1/32-in. thick.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.