Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 44, No. 5 (2020)

Hand-Held Metal, Vinyl “Slitter”

Featured source: Joseph Schmucker
Hand-Held Metal, Vinyl “Slitter”
Photo: FARM SHOW · Vol. 44, No. 5 (2020) · p. 34

“Our new hand-held ‘slitter’ cuts through metal up to 24-ga. thick, and also works great on vinyl. Anyone who puts up pole barns should have this tool,” says Joseph Schmucker, owner of JTS Sales, Marysville, Ind. The slitter is CNC-milled from 3/4-in. thick aluminum and measures 6-in. high by 8-in. long, making it small enough to fit in a nail pouch. It weighs just 2.3 lbs. The cutting is done by a pair of overlapping 2-in. dia. cutter wheels made from German quality steel. The tool is designed to be pushed or pulled lengthwise. You hold the metal with one hand and push or pull the slitter with the other hand.

“Whether it’s pushed or pulled, it makes smooth cuts without scratching anything,” says Schmucker.

“It works great on corrugated metal roofing because it makes a much smoother cut than cordless cutters, which cut more like a scissors going up and down. It also works great to cut trim pieces. The only limitation is that it can’t be used to cut sideways over the metal. The wheels can be sent in for resharpening.”

The metal and vinyl slitter retails for $275, with free shipping to the lower 48 states. Contact: FARM SHOW Followup, JTS Sales, 9951 Dickey Road, Marysville, Ind. 47141 (ph 812 289-1274).

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.