Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 44, No. 5 (2020)

Tony Ryba

Tony Ryba, Johnstown, Penn.

“Wanting to inspect the brakes on my Ford truck, I found that all 4 wheels were stuck to the rotors. Working on one wheel at a time, I applied penetrating oil to the joint between the rotor and wheel and let it sit a bit. Then I lowered the truck to the ground, removing the jack and jackstands, with the lug nuts left loose. Driving forward a couple feet, the brakes were applied. With a loud clunk the wheel would come loose from the rotor. When I reinstalled the wheel I applied a thin coating of grease between the wheel and rotor so it won’t happen again.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.