Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 44, No. 5 (2020)

Larry Wood

Larry Wood, Waldo, Ohio

“Tired of your trailer making noise when you travel down the road? I have a Ford F-350 with a 2 1⁄2-in. receiver hitch so I use a sleeve adaptor so our 2-in. ball hitch will work properly. But each time I pulled the 2-in. hitch out to change the ball size, the sleeve would move and pinhole would be misaligned.

“In order to solve both the noise problem and the alignment problem, I drilled and tapped a 1⁄2-in. hole in the bottom of the receiver and through the sleeve adaptor. Then I installed a short 1⁄2-in. bolt in the new hole. When the bolt is screwed in a short way, it holds the sleeve in place and when you screw it all the way in, it stops the rattle.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.