Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 44, No. 5 (2020)

Elwin Gingerich

Elwin Gingerich, Kalona, Iowa

“If you have a housing that needs a seal but the seal fits loosely because the housing is worn, get a 12-volt battery and a set of jumper cables. Attach the negative cable to the housing and the positive to a hacksaw blade. Strike the saw teeth across the worn housing and it will melt bits of saw teeth to the housing for a tight fit. I learned this trick from a Deere shop mechanic.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.