Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 44, No. 5 (2020)

$1.50 Tractor Headlight Repair

Featured source: Lawrence Goodman

“The rear headlight on my Dresser dozer didn’t work because of a bad wiring connection at the exterior screw on the housing. Because of corrosion, the screw head stripped when I tried to remove it. But instead of buying a new housing and bulb for about $70, I was able to repair the headlight for just $1.50. All I bought was a brass screw and 2 brass nuts,” says Lawrence Goodman, Ionia, Mich. He removed the bulb and cut off the wire connectors both inside and outside the housing. Then he removed a clip that holds a plastic piece inside the housing.

“I ground off the screw head from the interior side of the plastic piece to a brass insert that goes through the piece,” says Goodman.

“I used a 5/32-in. drill bit to drill straight through the housing and 2 screws, leaving a threaded brass insert in place inside the plastic piece.” He put together the brass screw, lock washer, and brass nuts, installed new wire connectors, and reinstalled the light.

“Now the light works like a million bucks,” says Goodman.

Contact: FARM SHOW Followup, Lawrence Goodman, 3200 Welch Rd., Ionia, Mich. 48846 (ph 616 755-1473; [email protected]).

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.