Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 43, No. 6 (2019)

Chainsaw Chain Sharpening Tip: Make Marks On Vise

Featured source: Glenn Alpert
Chainsaw Chain Sharpening Tip: Make Marks On Vise
Photo: FARM SHOW · Vol. 43, No. 6 (2019) · p. 33

Sharpening chainsaw chains is faster and more accurate for Glenn Alpert since he added lines on his vise.

“I used a Dremel tool to mark the right angle,” he explains.

“I put the bar in the vise and run the file 3 or 4 times on each tooth and then move the chain ahead. I can sharpen a chain in less than 5 minutes.”

The Paola, Kan., man has used the method often recently, while cutting Osage orange trees.

“I have to sharpen the chain about every 2 tanks of gas. I cut 10 cords of hedge wood and sharpened the saw every time without taking the chain off,” he says.

“The vise is mounted on an old burr mill stand and easy to take to the field.”

Contact: FARM SHOW Followup, Glenn Alpert, 15163 W. 323rd St., Paola, Kan. 66071 (ph 360 241-3622; [email protected]).

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.