Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 43, No. 6 (2019)

Joe Potteiger

Joe Potteiger, South Coffeyville, Okla.

“When my New Holland RB450 round baler stopped tying bales consistently, a friendly mechanic suggested I check the fuses. I had been having a problem with the automatic tie mechanism. The arm wouldn’t cross the bale to get the twine started. The manual said to hit reset, which I did. Sometimes it would help for 10 bales or so, and other times it wouldn’t help at all. I would have to manually tie the bale and then reset it.

“I discovered that the spade-type automotive fuses were loose inside the weathertight box on the wiring harness. The intermittent problems occurred when they jiggled loose. I opened the box, pushed them back in, and then cut a piece of lightweight foam insulation and shoved it into the box. That holds the fuses in place and solved the problem.

“It has been a good baler otherwise. It is such a simple thing that a lot of technicians don’t even realize it could be a problem.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.