Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 43, No. 3 (2019)

Cal Miner

Individual tip 2 of 3 from this reader’s published contribution.
Cal Miner, Willmar, Minn.

“I use an old drop-down lawn fertilizer spreader to apply asphalt sealer on my driveway. I cover all the holes in the spreader with duct tape, except for the metering holes at the bottom. I fill the spreader about 2/3 full and open the shut-off lever. Then I start walking backward so I don’t leave tracks as I go back and forth down the driveway. The sealer drips out of the metering holes in a series of thin strips, and after I’ve covered the entire driveway I go back and squeege the material at an angle to smoothen it out.

“This method is much easier and cleaner than pouring sealer out of a 5-gal. bucket and having it splash all over me. If I’m careful, I don’t even get my feet dirty.

“To avoid leaving footprints, I trace around an old pair of shoes on a piece of plywood and then attach the shoes to the plywood with 1 5/8-in. sheetrock screws. They protrude about 1/4 in. out the bottom of the shoe, so I’m walking only on the tips of the screws.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.