
“Our Rear Wheel Puller is designed to fit John Deere A, B, G and H tractors. The kit comes with a 1-in. thick round puller plate with elongated holes in it and 4 threaded bolts. You put the nut on the center bolt with 1/2 in. of the bolt sticking out of the plate, then insert the bolt into the turning hole in the end of the axle.
“Screw the other 3 bolts into the hub, making sure the bolt sticks through the back side of the hub. Then put the puller plate on the 3 bolts and screw nuts onto them until the pressure pulls the plate up square with the bolts.
“The Rear Wheel Puller sells for $150 plus $14 shipping by USPS Priority Mail. Additional bolt assemblies for other models sell for $40 plus S&H. Comes with a money-back guarantee.”
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.