
“My four chainsaws and the oil and fuel needed for them were cluttering up my shop floor, so I built a chainsaw stand to keep everything organized. It cleared up a lot of floor space,” says Dave Neil, New London, Iowa. The 38-in. tall stand is 2 ft. wide and 1 ft. deep. Neil used 1-in. square tubing for the frame and 1/16-in. thick sheet metal for the shelves and a partially-enclosed back side.
“I store the saws on one side of the shelves and the oil and fuel cans on the other side. The chainsaw bars extend through a gap out the back so they’re always out of the way,” says Neil. Contact: FARM SHOW Followup, Dave Neil, 2920 Quaker Ave., New London, Iowa 52645 (ph 319 367-5690).
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.