Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 42, No. 3 (2018)

Wheel Guards For Welders, Toolboxes Push Debris Away

Featured source: Bryan Dubas
Wheel Guards For Welders, Toolboxes Push Debris Away
Photo: FARM SHOW · Vol. 42, No. 3 (2018) · p. 33

“Our new Path Pro wheel guards snap onto the wheels found on welder carts and rolling toolboxes. They push small obstacles such as cords and welding leads out of the way, to keep the cart or toolbox from getting hung up on debris as you move around your shop,” says Bryan Dubas, Fullerton, Neb. The polypropylene wheel guards are designed for use on solid level surfaces. They come in 2 halves that bolt together using 2 pre-drilled holes. To install them you just lift the wheel up and snap the guard onto the bottom. Wheel guards are available in diameters from 4 to 10 in. and widths from 1 to 3 in. Prices range from $15.99 plus shipping for a pair of 4 by 1-in. wheel guards, to $49.99 plus shipping for a welder set that includes two 4 by 1 1/2-in. and two 10 by 2 1/2-in. guards. Contact: FARM SHOW Followup, The Caster Master, 101 Broadway St., Fullerton, Neb. 68638 (ph 308 550-0151; [email protected]; www.thecastermaster.com).

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.