Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 42, No. 3 (2018)

Mobile Air Splitting Manifold

Featured source: Gary Swensen

“One day two of my sons each had projects going outside where they needed compressed air, sharing one large line from the compressor in my shop. When I asked if I could use the hose to air up my trailer tires, they both said ‘No!’ at the same time,” says Gary Swensen, Yankton, S. Dak.

“So that’s when I got the idea for a mobile air splitter that we could carry outside and connect air lines for multiple projects. One large line goes in the end of the splitter and 6 lines out are fitted with quick couplers.

“This kind of manifold needs to be built extremely heavy-duty. I used a large piece of heavy-gauge pipe with ends welded in place and holes drilled in the sides for the pipe fittings. I added a handle to make it easy to carry and added a couple small legs to hold it off the ground. No more sharing and swearing, and no need to run separate air lines for each project.” Contact: FARM SHOW Followup, Gary Swensen, 1408 Sunrise Drive, Yankton, S. Dak. 57078 (ph 605 660-3489; [email protected]).

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.