Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 42, No. 3 (2018)

Dennis Strahle

Dennis Strahle, Eagle, Mich.

“I was in the shop late one evening and turned on the acetylene. Gas promptly spewed out at me from a crack in the hose next to the head where the hose flexes. The rest of the hose was in good condition. A little investigation showed that the hose outer diameter fit nicely inside of a 1/2-in. copper tube and that the copper tube fit nicely into my PEX crimp tool. I cut off the original brass crimp on the cracked hose, cut away 6 in. back to fresh hose, slid on the piece of 1/2-in.copper pipe, and crimped it. I liked the fix so much I did the same thing on the oxygen hose, too. Should be good for many years and saved the cost of a new hose.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.