Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 42, No. 2 (2018)

Brian Lough

Individual tip 1 of 2 from this reader’s published contribution.
Brian Lough, Indian Head, Md.

“When repairing items with J-B Weld epoxy or other adhesives, I first apply a layer of epoxy. Then I place strips of storm window screen onto the epoxy to add strength to the repair. For even more strength, you can add an additional layer of screen diagonally to the first one. Prior to using the epoxy, I clean all surfaces with acetone to remove any contaminates.

“I used this idea a couple of years ago on an old tractor that I was restoring. It had a cast iron engine with a cracked block. I was worried that expansion and contraction of the metal might cause problems so I cleaned the cracked area, then used a die grinder to rough up the metal around the crack and applied a layer of epoxy. Then I placed a screen over the epoxy and added another layer of epoxy on top of it. Problem solved.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.